Measurement And Testing EMC UNIT

Automotive +
- BMW GS 95002-3
- CISPR 12
- CISPR 25 (EN 55025)
- FMC1278
- FMC1280
- GM W 3097
- IEC 61851-21-1
- IEC 61851-23
- ISO 11452-2
- ISO 11452-3
- ISO 11452-4
- ISO 11452-5
- ISO 11452-8
- ISO 11452-9
- ISO 16750-2
- ISO 21498
- ISO 7637-2
- ISO 7637-3
- ISO 7637-4
- LV 123
- LV 124
- LV 148
- MBN 11123
- PSA B21 7112
- SAE J 1113/2
- SAE J1752/3
- UN ECE R10
- VW 80300
- VW 80303
Component +
International Product Standards +
International Test Standards +
Military & Avionics +
Safety +
- ANSI/IEEE C62.41
- IEC 60204
- IEC 60255
- IEC 60335
- IEC 60664-1
- IEC 60745
- IEC 60950-1
- IEC 61010-1
- IEC 61180
- IEC 61730
- IEC 62053
Telecom/Wireless +

TT 1.0 PF, Turn Table, 0.8m Diameter, 100kG

Free-standing turntable for anechoic Chambers.

Diameter 1.0 m
Load capability 100 kg
Height 190 mm

Other diameters and load capabilities are available on request.

CDN 504U / CDN 508U, 4/8-Line, Surge and EFT/burst, Coupling Decoupling Network

Designed for applying the impulse output voltage of the Combination wave/ Ring wave generator to interconnection lines of the equipment under test, acc. to IEC 61000-4-5, Fig9/ IEC 61000-4-12, Fig. 8.

The coupling/decoupling network CDN 504/ 508 U essentially consists of a current compensated decoupling inductor, L1 – L4/L8, and a set of coupling impedances to be inserted in the coupling path.

CG 50/500, 50 kHz - 30 MHz, 50 and 500 kHz Steps, Conducted Comb Generator

Frequency Range: 50 kHz - 30 MHz
Frequency step: 50 kHz or 500 kHz switchable
IEC320 C14, RJ11, RJ45
Includes: Generator, charger, wood case

CG-01-5/10, 5 MHz - 1 GHz, 5 & 10 MHz Steps, Comb Generator

Frequency Range: 5 MHz - 1 GHz
Frequency step: 5 & 10 MHz switchable
Includes: Generator, antenna, charger, wood case

CG 10L/510R, 10 kHz - 1 GHz, 10/500kHz 5/10MHz Steps, Conducted & Radiated Comb Generator

Frequency Range:

10 kHz - 30 MHz Conducted
5 MHz - 1GHz Radiated

Frequency step:

10/500 kHz switchable CE
5/10 MHz switchable RE

Includes: Generator, antenna, charger, wood case

DTEM 6000 Double TEM for Shielding effectiveness

Double Transverse ElectroMagnetic (DTEM) cell or Double Crawford cell (named after its inventor) is used to generate accurate electromagnetic waves over a wide frequency range: DC (0 Hz) to 6 GHz and measure attenuation through materials in a very predictable and accurate way. EM waves generated in the cell propagate in transverse mode and have the same characteristics as a plane wave. It can be used to calibrate E-field broadband probes for testing radiated E-field immunity as well as for measuring radiated emission from a product with a spectrum analyzer/EMI receiver.