Test System for MIL-STD-641 CS114, CS115, CS116

• Automatic calibration for the whole test frequency range
• Application of all test frequencies automatically. The level can be selected or automatic.
• NO need to manually configure the measurement equipment
• NO need to manually integrate the transfer function of probes and attenuators
• Generation of test reports: NO need to record all values read from the measurement equipment
• Generation of calibration reports: NO need to record all calibration setting parameters
• Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)

Support arm with balancer for ESD test station

• The only support arm is made from non-metal 
• 1.5" Fiberglass Tubes,
• 3D Printed: Cage, holder, base
• Custom ESD simulator adaption
• Balancer is plastic housing and string (only the spring is metallic)
• Only the system meets the metal-free area requirements of standards
• Support arm with the carriage
• 360 degrees pivotable
• Customized attachment to the table included

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
• Measure 4 lines of 3 phase LISN
• The picture is shown with internal LISN [EMSCOPE RX4 LZ2]

The EMC test system is designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. EMC - Test Equipment for the electrical installation of vehicles.

• Pulse  #1 1-5/2000us, 600 V
•          #1 1-5/1000us, 600 V
• Pulse #2a 1 / 50us, 600 V
• Pulse #3 5/100 ns, 800 V

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.

Benefits of the PG1275F Pulse Generator

• MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
• Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
• High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
• Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
• User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.

Enhance your EMC testing with the 1275F Pulse Generator—precision, compliance, and versatility combined.

Highlights of the CS116 Damped Sinusoid Generator

• MIL-STD 461 CS116 Compliant: Meets stringent military testing standards.
• Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
• Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
• Efficient Operation: Single signal output reduces test time and supports automation.
• User-Friendly Control: Easily controlled via RS232 and USB interfaces.
• Versatile Configurations: Available as standalone (POG-CS116-6) or modular (M-CS116) units.
• Robust Design: Durable construction with wide power compatibility (90–264 Vac).

Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.

PGESD 300K DP - Helicopter 300kV ESD Test System

• High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
• Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
• Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
• Automated Operation: PC-based software for remote control, calibration, and test reporting.
• Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
• Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
• Durable Design: Built for demanding military and industrial testing environments.