Categories

CISPR 24 (EN 55024)

OTHER PRODUCTS IN THE SAME STANDARD:
LS Fiber Connector Cleaning Kit

The fiber connector cleaning kit allows for cleansing the fiber optic connector to ensure reliable operation of the LSProbes and other Fiber optic products.

EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner

  • Capability:
    • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
  • Spatial scan time:
    • Continuous real-time or sub-second single scan for the entire scan area is dependent on spectrum analyzer performance.
  • Spectral scan time:
    • 45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
  • EMViewer Software
    • We recommend you use the EMViewer software for best results.  A Yearly subscription or a once-off purchase is available. 
  • Supported operating systems: Windows 10®
  • Supported CAD overlays: Standard Gerber© RS274x format and HPGL format

EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner

  • Capability:
    • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
  • Spatial scan time:
    • Continuous real-time for the entire scan area (1,218 probes activated) when Level 1 is selected:  5 sec.
    • Selected area 2.25 cm x 2.25 cm, 9 probes activated.
    • Level 1: 
  • Spectral scan time:
    • 11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
  • Supported operating systems: Windows 10®
  • Supported overlays: Picture in JPEG format 
  • Standard Gerber© RS274x format and HPGL form

EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner

  • Capability:
    • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
    • Customization of the robot arm size, any size, is possible. 
  • Spatial scan time:
    • The scan time depends on size and area
  • Ideal for large component boards
    • The robotic arm allows for advanced scans on complex items
  • Supported operating systems: Windows 10®
  • Supported overlays: Picture in JPEG format 
  • Standard Gerber© RS274x format and HPGL form

EM Near Field Probe Kit w/Camera & Software

" A Probe Kit on Steroids"

  • Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
  • Normalization and correction when using the EMViewer software
  • Flat response within the range of operation
  • Slim Design and Protective Coating
  • 18GHz Measured Cable included

RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz

  • Frequency Range of 300 MHz to 6.0 GHz
  • Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns
  • Near-field insights such as Amplitude and Phase distribution are available in  seconds
  • Gain, Efficiency, and S11 chart with Supported VNAs
  • “Real-time” real-fast
  • Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas). 
  • Simple set up and Easy to use

Loading...