The LSProbe 2.0 Variant A Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.

• Its standard frequency range of 9 kHz – 18 GHz. 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.

The LSProbe 2.0 Variant B Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.

• Its standard frequency range is 9 kHz – 26.5 GHz. (Variant B) 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.

• Class-A architecture 
• High reliability proven GaAs design
• Wideband 1 GHz – 2 GHz 
• Unconditional stability & extreme VSWR tolerance 
• RTCA DO-160 Section 20 testing

Highlights of the IP-DR250, One Probe to Unite All EMC Testing

• Frequency Range: 10 kHz to 400 MHz (extended: 4 kHz to 400 MHz with optional adapter)
• Power Handling: Up to 500 W CW (150 W – 60 min, 300 W – 30 min, 500 W – 15 min)
• Window Diameter: 43.8 mm
• Construction: Durable, shielded design with precision-machined housing
• Input Connector: Type N (Female)

The LSProbe 1.2 Variant E Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

• Its standard frequency range of 10 kHz – 8.2 GHz. 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 0.1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
• Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.

Absolute EMC offers an assortment of injection test kits for the use of conducted immunity. The kits can be used with many available conducted immunity systems, including the Schlöder CDG 7000, to make selection and setup easy. All calibration fixtures, injection clamps, attenuators, and termination resistors necessary for meeting the requirements of conducted immunity systems. All all-in-one systems are covered.