Standards

Products

NNHV 8123, 0.1 - 150 MHz, High Voltage, 70A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
  • impedance (5µH) || 50 Ohm
  • 70 A, 1500 V (DC)
  • Backside with built-in 0.1 microfarad capacitor to ground
  • N-jack

CMDM 8700 D Common mode / Differential mode switch

The measurement mode switch CMDM 8700 B expands the measurement possibilities of two V-LISN to T- and Delta-LISNs for the profound analysis of interference emissions.

BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614

  • BAN broadband artificial network
  • acc. ISO 11452-7 or DC-10614
  • BAN 8508,  2 A - 8 A
  • BAN 8530,  8 A - 30 A
  • DC-Block 500, DC-blocking capacitor

ISN S1, ISN for Coax Acc CISPR 32 - Discontinued

Discontinued - Replaced with CDN ISN S1 BNC

  • ISN acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Annex D, D9 for coaxial lines

ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32 - Discontinued

Discontinued. See CDN ISN S8 RJ45

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • CISPR 22, CISPR 32 Annex G.11 and EN 55022 Annex D figure D.11
  • Is capable to provide 1000 MBit/s (Gigabit-Ethernet, 1000BASE-T).

CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Unshielded twisted pairs (UTP) or communication ports 
  • With 2, 4, 6, or 8 wires

CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Unshielded twisted pairs (UTP) or communication ports 
  • With 2, 4, 6, or 8 wires

HHS 5215-100-2.5 - DC - 6 kHz, Square Helmholtz Coils

Square Helmholtz Coils

Precisely defined magnetic fields. DC - 6 kHz.

The Schwarzbeck HHS 5215-100-2 generates defined magnetic fields from DC to 6 kHz. Its 100-turn coils provide a calculable relationship between drive current and magnetic field strength.

Coil Set 14708-7, Test set for testing to ISO 14708-7 A/B levels

LF Transmit Coil (CABTL16 & CABTL11)

  • Frequency: 16.6 Hz - 27MHz
  • 2 loop sets
  • Meets ISO 14708-7 Criteria A and High B levels
  • Use 100 Watt Audio amplifier up to 35kHz
  • Use 150 Watt 50Ohm amplifier 25 kHz - 27 MHz 

 

CAL CMAD 1614, Calibration fixture for CMAD 1614

  • Calibration fixture for Common-Mode Absorbing Clamp
  • (10) 30 - 200 (1000)MHz


Loading...