The fiber connector cleaning kit allows for cleansing the fiber optic connector to ensure reliable operation of the LSProbes and other Fiber optic products.

The LSProbe 2.0 Variant A Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.

• Its standard frequency range of 9 kHz – 18 GHz. 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.

The LSProbe 2.0 Variant B Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.

• Its standard frequency range is 9 kHz – 26.5 GHz. (Variant B) 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.

The LSProbe 1.2 Variant E Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

• Its standard frequency range of 10 kHz – 8.2 GHz. 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 0.1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
• Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.

The LSProbe 1.2 Variant E Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

• Its standard frequency range of 10 kHz – 8.2 GHz. 15,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 15 to at least 15,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
• Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.

• Low-profile 12'×10' floor plane with matching vertical wall (up to 12'×10') in galvanized steel.
• Staggered two-layer floor design: wide metal-to-metal overlap, ultra-low impedance, almost zero step height.
• Fast install (1–2 days) with full bonding/continuity verification to the building ground or a shielded room.
• Engineered to meet IEC 61000, CISPR, and MIL-STD-461 ground-plane requirements.
• Custom sizes/materials (steel, aluminum, copper), edge ramps, LISN pads, and cable trenches available.
• Delivers repeatable EMC/ESD results by minimizing loop impedance and stray coupling paths.