optoLAN 100Base-T1 BCM89811, Fiber-optic Link Automotive Ethernet signals
optoLAN-100 MBit/s, Fiber-optic Link Ethernet signals
optoLAN 100/1000Base-TX, 1 GBit/s, Fiber-optic Link Ethernet signals
optoUSB2.0, Fiber-optic Link for USB
optoUSB2.0 -RBDIR, Fiber-optic Link for USB
opto1394, Fiber-optic Link Firewire/IEEE 1394
optoUART, Fiber-optic Link for UART Signals
optoTTL 5-3-u, Fiber-optic Link for 3.5 & 5 V TTL signals
optoTTL b-12, Fiber-optic Link for 16 Bidirectional 12V TTL signals
optoRS485, Fiber-optic Link for RS485 signals
optoRS232-HS, Fiber-optic Link for RS232 signals
Products
LS Fiber Connector Cleaning Kit
The fiber connector cleaning kit allows for cleansing the fiber optic connector to ensure reliable operation of the LSProbes and other Fiber optic products.
optoLAN 100Base-T1 BCM89811, Fiber-optic Link Automotive Ethernet signals
The optoLAN-BCM89811 system can be used for the optical transmission of automotive ethernet signals with Broadcom© BCM89811© and other 100BaseT1 chipsets. There are two setups available, T1 to T1 (standard) or T1 to Tx (with integrated media converter => optoLAN-BCM89811 -MC), see separate setup document. The standard connector is Rosenberger HSD (Z-coded).
optoLAN-100 MBit/s, Fiber-optic Link Ethernet signals
The optoLAN-100-MAX system can be used for the optical transmission of Ethernet (LAN-) signals with a data rate of up to 100Mbit/s (100BaseTx). The two identical transceivers are supplied by internal batteries and connected with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests. The device is not downward compatible to 10BaseT. If you need this option you can get the optoLAN-Gb.
optoLAN 100/1000Base-TX, 1 GBit/s, Fiber-optic Link Ethernet signals
This optical device is used for the bidirectional optical transmission of ethernet signals with a transmission rate of 1 GBit/s. It is downward compatible to 100BaseT and 10BaseT (automatically detected). The system consists of two identical transceivers supplied by batteries and a duplex 62.5/125µm-multimode optical cable.
A new type of connector is available now: The M12 connector (MMT471A315, counterpart MNF881A315-0001) by Metz Connect was integrated into our optical transmitter for Ethernet signals optoLAN, as well as optoLAN-Gb. Therefore, these devices are even fitter for tests of electromagnetic compatibility.
optoUSB2.0, Fiber-optic Link for USB
The optoUSB-2.0 system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
optoUSB2.0 -RBDIR, Fiber-optic Link for USB
The optoUSB-2.0-RBDIR system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- optoUSB2.0-RBDIR uses a Rosenberger connector which has been proven to be more EMI robust)
- optoUSB2.0 USB hub with 4 USB ports (not as EMI robust as -RBRIR version)
- optoUSB3.0 USB hub with 2 USB ports (not as EMI robust as 2.0-RBRIR version)
opto1394, Fiber-optic Link Firewire/IEEE 1394
opto1394 This system is used for the optical transmission of IEEE1394/Firewire-signals and can transmit data rates of up to 400 Mbit/s (800 Mbit/s at 1394b). The transmitter system consists of two similar transceivers supplied by batteries and a duplex-62,5/125µm-multimode optical cable. Due to its insensitivity against strong electromagnetic fields, the opto1394 is fit for tests of electromagnetic compatibility in EMC-test chambers, TEM-cells, and striplines. The system can also be used for the fail-proof transmission of signals across long distances.
optoUART, Fiber-optic Link for UART Signals
The optoUART system can be used for the optical transmission of UART-signals up to a data rate of 1 Mbit/s.
It can be used to transmit UART-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
optoTTL 5-3-u, Fiber-optic Link for 3.5 & 5 V TTL signals
ptoTTL 5-3-u is used for the optical transmission of TTL (Transistor-Transistor Logic) 3.5 & 5 V TTL signals digital signals. Up to 16 digital signals with a sampling rate of 40 MS/s (each channel) can be transmitted. The system consists of a transmitter supplied by batteries, a simplex-62,5/125µm-multimode optical cable, and a receiver – which has integrated batteries as well.
optoTTL b-12, Fiber-optic Link for 16 Bidirectional 12V TTL signals
The optoTTL b-12 is used for the optical transmission of 12-volt TTL (Transistor-Transistor Logic) digital signals. Up to 16 bidirectional digital signals with a sampling rate of 40 MS/s (each channel) can be transmitted. The system consists of a transmitter supplied by batteries, a simplex-62,5/125µm-multimode optical cable, and a receiver – which has integrated batteries as well.
optoRS485, Fiber-optic Link for RS485 signals
The optoRS485 system can be used for the optical transmission of RS485-signals up to a data rate of 1 Mbit/s. It can be used to transmit RS485-signals over long distances or to handle ground potential problems. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
optoRS232-HS, Fiber-optic Link for RS232 signals
The optoRS232-HS system can be used for the optical transmission of RS232 signals (hardware handshake) with transmission rates of up to 116 kbit/s. It consists of two identical battery-supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
