CDG 7000-E Conducted Immunity Generator, (4)9 kHz - 1 GHz , No internal Amplifier
CDG 7000-75-10 Magnetic & Conducted Immunity, 10 kHz - 250MHz
Wood Test Table Kit
Injection Clamp Kits (ICK) EM and BCI Clamps
CDN M-type - Mains / Power supply applications
CDN S-type - Screened cables
CDN AF-type - Unscreened unbalanced lines
CDN T-type - Unscreened balanced lines
EMCL- NW 10 / MN-1 EM Clamp Matching Network
CDN EMCL-20 / CDN EMCL-35 EM Clamp
CDN ABCL-20 Decoupling Clamp
Products
CDG 7000 Conducted Immunity, 10 kHz - 400MHz
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.
CDG 7000-E Conducted Immunity Generator, (4)9 kHz - 1 GHz , No internal Amplifier
The CDG 7000-E is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application.
- The compact device comprises an RF signal generator, a 3-channel RF voltmeter, and a directional coupler.
- Frequency range of the generator/power meter (4 kHz): 9 kHz – 1200 MHz
- The frequency range of the directional coupler: 10 kHz – 1000 MHz, 200 W
- Depending on ext. amplifier: IEC/EN 61000-4-6, IEC 60601-1-2 Ed. 4.1, IEC 61000-4-39, MIL 461 CS 114, ISO 11452-4, ...
CDG 7000-75-10 Magnetic & Conducted Immunity, 10 kHz - 250MHz
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.
Wood Test Table Kit
The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.
Injection Clamp Kits (ICK) EM and BCI Clamps
Absolute EMC offers an assortment of injection test kits for the use of conducted immunity. The kits can be used with many available conducted immunity systems, including the Schlöder CDG 7000, to make selection and setup easy. All calibration fixtures, injection clamps, attenuators, and termination resistors necessary for meeting the requirements of conducted immunity systems. All all-in-one systems are covered.
CDN M-type - Mains / Power supply applications
The Coupling- / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
CDN S-type - Screened cables
The Coupling- / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
CDN AF-type - Unscreened unbalanced lines
The Coupling- / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
CDN T-type - Unscreened balanced lines
The Coupling / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
EMCL- NW 10 / MN-1 EM Clamp Matching Network
EMCL- NW 10 / MN-1 Matching Network • For use with the EMCL-20 in the frequency range 10 kHz – 150 kHz • For use with the CDN BCI-P1 in the frequency range 10 kHz – 150 kHz
CDN EMCL-20 / CDN EMCL-35 EM Clamp
EM Clamp for immunity tests IEC / EN 61000-4-6 Ed. 4.0 • EM Clamp for immunity testing of cables with up to 20 (35) mm diameter • High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V • Calibration unit and calibration data are supplied with each unit.
CDN ABCL-20 Decoupling Clamp
CDN ABCL-20 Decoupling Clamp for immunity according to IEC / EN 61000-4-6 Ed. 4.0 100 kHz – 1000 MHz Features: For additional decoupling at immunity testing according to IEC / EN 61000-4-6 Suitable for cables up to 20mm diameter
