Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set
CAB134k Coupling Network for 134kHz
CAB1356m Coupling Network for 13.56 MHz
HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna
FESP 5139 - DISCONTINUED replaced by HFRA 5164
FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop
FESP 5132 - DC - 150 kHz Radiating Loop
FESP 5133 - DC - 200 kHz Radiating Loop
FESP 5133-1330 - DC - 50 kHz Radiating Loop
FESP 5135 - DC - 300 kHz Radiating Loop
HFRA SF02G - 0.01 - 30 MHz Transmitting Tunable loop antenna
Products
Coil Set 4-39_9k-150k EN 61000-4-39 & RS101 9kHz - 150kHz, Tx & Rx Set
Low-Frequency Transmit Coil (CAB4-3912)
- Frequency: 9 kHz to 150 kHz
- Main Diameter: 120 mm
- Maximum Current: 15 A
- Number of turns: 20
Low-Frequency Sense Coil (CABLSLF)
- Frequency: 9 kHz to 150 kHz
- Diameter to center of the coil: 40 mm
- Number of turns: 51
- Wire type: 7/41 LITZ
- Winding Type: Electrostatically shielded
Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set
High-Frequency Transmit Coil (CAB4-3910)
- Frequency: 150 kHz to 26 MHz
- Main Diameter: 100 mm
- Number of Turns: 3
- Wire Diameter: 1mm
- Connection type: ‘N’ type Coaxial
High-Frequency Sense Coil (CABLSHF)
- Frequency: 150 kHz to 26 MHz
- Diameter to center of the coil: 41 mm
- Number of turns: 1
- Wire type: 1mm single core
- Winding Type: Electrostatically shielded
CAB134k Coupling Network for 134kHz
Coupling Network for 134kHz
- It matches 50 Ohm amplifier
- Use with CAB4-3912 loop antenna
- Can work with other similar antennas
- Type N f-n connectors attached directly to loop
CAB1356m Coupling Network for 13.56 MHz
Coupling Network for 13.56 MHz
- It matches 50 Ohm amplifier
- Use with CAB4-3910 loop antenna
- Can work with other similar antennas
- Type N f-n connectors attached directly to the loop
HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna
- The circular transmitting loop antenna
- 0.01 - 120 MHz
- diam. 100 mm
- turns 3
- BNC Connectors
FESP 5139 - DISCONTINUED replaced by HFRA 5164
- After further development of this antenna, it has been discovered a shielded antenna is needed to be useful above 5MHz
- New HFRA 5164 is 100% compliant to IEC 61000-4-39
FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop
- Magnetic, handheld coil
- 10 kHz - 3 MHz
- diam. 133 mm
- turns 9
- Immunity testing to VG 95377 Part 13
FESP 5132 - DC - 150 kHz Radiating Loop
- Magnetic, handheld coil
- DC - 150 kHz
- diam. 120 mm
- turns 20
- Immunity testing to: ISO 11452-8, MIL 461E RS101, EN 55103 5.18.3.2, IEC 61000-4-39
FESP 5133 - DC - 200 kHz Radiating Loop
- Magnetic, handheld coil
- DC - 200 kHz
- diam. 133 mm
- turns 36
- Immunity testing to MIL 461, EN 55103 - 2 A.2.1 b), EN 55103 - 2 A.4.1
FESP 5133-1330 - DC - 50 kHz Radiating Loop
- Magnetic, handheld coil
- DC - 50 kHz
- diam. 126 mm
- turns 225
- Immunity testing to Measuring Method SF 01 G acc. to VG 95377
FESP 5135 - DC - 300 kHz Radiating Loop
- Magnetic, handheld coil
- DC - 300 kHz
- diam. 500 mm
- turns 20
- Immunity testing to EN 55103 - 2 A.3.1
HFRA SF02G - 0.01 - 30 MHz Transmitting Tunable loop antenna
- 10 kHz to 30 MHz
- acc. to VG95373-13:2008-11 and VG95373-23:2008-11. Including sensor loop HFRAE 5163 and control cable.
- diam. 500 mm
- 2 Turn
- 16 Watts
