Categories

IEC/EN 61000-4-12

OTHER PRODUCTS IN THE SAME STANDARD:
PEFT 8010 EFT/Burst Test System up to 7.3 kV

PEFT 8010 

  • EFT/Burst
  • Up to 7.3kV (6.6kV at CDN)
  • CDN: 264V-AC 16-440Hz, 125V-DC
  • CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC

Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops

Axos 8 - Compact

  • Multi Tester with 16AMP CDN
  • EFT/Burst 5kV IEC 61000-4-4
  • Surge, Combination Wave 7kV IEC 61000-4-5
  • Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
  • Ring Wave, 7kV IEC 61000-4-12 & ANSI
  • Telicomm Wave, 7kV IEC 61000-4-5 & ITU
  • AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
  • DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)

PCD 126A - 6.6 kV Surge and Ring-Wave Coupling Network

Surge coupling for unbalanced lines, plus ring-wave coupling for balanced and unbalanced lines.

The Haefely PCD 126A couples combination-wave surge and 100 kHz ring-wave disturbances onto up to four unshielded data or control wires at 6.6 kV peak. Combination-wave testing is for asymmetrical lines; ring-wave testing supports both symmetrical and asymmetrical lines. Coupling elements and paths are selected manually, with decoupling supplied separately.

FP-COMB 63 / 125 / 200 A - 1500 V DC Coupling / Decoupling Networks

High-voltage DC transient testing with a path to AC capability.

The Haefely FP-COMB /1500-1 family couples surge combination wave, ring wave and EFT/burst disturbances onto DC power circuits up to 1500 V. Select a 63, 125 or 200 A network to match the EUT. Add the AC option when your test program also needs single- or three-phase AC coverage.

63 / 125 / 200 A | 7 kV surge and ring wave | 5 kV EFT/burst

FP-COMB 63 / 125 / 200 A - 690 V AC + 1500 V DC Test Networks

One configured network for 690 V AC applications and high-voltage DC testing.

Specify the Haefely FP-COMB /1500-1 with its AC option for both AC and DC test programs. The combined configuration supports 1500 V DC and AC operation up to 1000 Vrms, including commonly specified 690 V AC systems. Choose 63, 125 or 200 A; retain the DC capability while adding the AC coupling and synchronization functions.

63 / 125 / 200 A | 7 kV surge and ring wave | 5 kV EFT/burst

DEC 6 - 6.6 kV Decoupling Network for Symmetrical Lines

200 ohm resistors for symmetrical signal-line testing.

The Haefely DEC 6 separates auxiliary equipment from an EUT during transient immunity testing on unshielded symmetrical lines. It supports up to four wires and impulses up to 6.6 kV, using 200 ohm resistors. Coupling is performed by a separate network, allowing protection and decoupling to match the signal circuit.

Loading...