EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner
EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner
EM Near Field Probe Kit w/Camera & Software
FS-SET 7100 B, 9 kHz - 1 GHz, Active Nearfield Probe Set
TBPS01 EMC NEAR-FIELD PROBES + TBWA2/40dB WIDEBAND AMPLIFIER
TBPS01 EMC NEAR-FIELD PROBES + TBWA2/20dB WIDEBAND AMPLIFIER
FSH3D Isotropic H-Field Handheld Antenna
TBPS01 EMC NEAR-FIELD PROBES
FSE3D Isotropic E-Field Handheld Antenna
FSHPE, 9 kHz - 300 MHz, Single Axis E-Field Antenna
FSHPH, 9 kHz - 300 MHz, Single Axis H-Field Antenna
Products
EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
- Spatial scan time:
- Continuous real-time or sub-second single scan for the entire scan area is dependent on spectrum analyzer performance.
- Spectral scan time:
- 45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
- EMViewer Software
- We recommend you use the EMViewer software for best results. A Yearly subscription or a once-off purchase is available.
- Supported operating systems: Windows 10®
- Supported CAD overlays: Standard Gerber© RS274x format and HPGL format
EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner
- Capability:
-
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
- Spatial scan time:
-
- Continuous real-time for the entire scan area (1,218 probes activated) when Level 1 is selected: 5 sec.
- Selected area 2.25 cm x 2.25 cm, 9 probes activated.
- Level 1:
- Spectral scan time:
-
- 11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
- Supported operating systems: Windows 10®
- Supported overlays: Picture in JPEG format
- Standard Gerber© RS274x format and HPGL form
EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
- Customization of the robot arm size, any size, is possible.
- Spatial scan time:
-
- The scan time depends on size and area
- Ideal for large component boards
- The robotic arm allows for advanced scans on complex items
- Supported operating systems: Windows 10®
- Supported overlays: Picture in JPEG format
- Standard Gerber© RS274x format and HPGL form
EM Near Field Probe Kit w/Camera & Software
" A Probe Kit on Steroids"
- Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
- Normalization and correction when using the EMViewer software
- Flat response within the range of operation
- Slim Design and Protective Coating
- 18GHz Measured Cable included
FS-SET 7100 B, 9 kHz - 1 GHz, Active Nearfield Probe Set
Nearfield Probe Set including:
- HFSL 7101 B Active Near Field Probe (magnetic), 9 kHz - 30 MHz
- HFSH 7102 B Active Near Field Probe (magnetic), 4 MHz - 1000 MHz
- EFS 7103 B Active Near Field Probe (electric), 9 kHz - 1000 MHz
- and Separator EW 7110 and AC/DC adaptor ACDC 7110 in storing case
TBPS01 EMC NEAR-FIELD PROBES + TBWA2/40dB WIDEBAND AMPLIFIER
The H20, H10, H5, and E5 are magnetic field (H) and electric field (E) probes for radiated emissions EMC pre-compliance measurements. The probes are used in the near field of sources of electromagnetic radiation. They serve to locate and identify potential sources of interference within the building blocks of electronic assemblies. The probes act similar to wide bandwidth antennas, picking up radiated emissions from components, PCB traces, housing openings or gaps and from any other parts that could be emitting RF. The probes are usually connected to a spectrum analyzer. Scanning the probe over the surface of a PCB assembly or housing quickly identifies locations which emit electromagnetic radiation. By changing to a probe with a smaller size, the origination of the emissions can be further narrowed down. With TBWA2 WIDEBAND AMPLIFIER/40DB
TBPS01 EMC NEAR-FIELD PROBES + TBWA2/20dB WIDEBAND AMPLIFIER
The H20, H10, H5, and E5 are magnetic field (H) and electric field (E) probes for radiated emissions EMC pre-compliance measurements. The probes are used in the near field of sources of electromagnetic radiation. They serve to locate and identify potential sources of interference within the building blocks of electronic assemblies. The probes act similar to wide bandwidth antennas, picking up radiated emissions from components, PCB traces, housing openings or gaps and from any other parts that could be emitting RF. The probes are usually connected to a spectrum analyzer. Scanning the probe over the surface of a PCB assembly or housing quickly identifies locations which emit electromagnetic radiation. By changing to a probe with a smaller size, the origination of the emissions can be further narrowed down. With TBWA2 WIDEBAND AMPLIFIER/20DB
FSH3D Isotropic H-Field Handheld Antenna
- Isotropic H-Field Antenna
- Rohde und Schwarz handheld spectrum analyser FSH or the TS-EMF System.
- 9 kHz - 200 (300) MHz
- Lightweight low attenuation radome
- Outer diameter ca. 150 mm
TBPS01 EMC NEAR-FIELD PROBES
The H20, H10, H5, and E5 are magnetic field (H) and electric field (E) probes for radiated emissions EMC pre-compliance measurements. The probes are used in the near field of sources of electromagnetic radiation. They serve to locate and identify potential sources of interference within the building blocks of electronic assemblies. The probes act similar to wide bandwidth antennas, picking up radiated emissions from components, PCB traces, housing openings or gaps, and from any other parts that could be emitting RF. The probes are usually connected to a spectrum analyzer. Scanning the probe over the surface of a PCB assembly or housing quickly identifies locations that emit electromagnetic radiation. By changing to a probe with a smaller size, the origination of the emissions can be further narrowed down.
FSE3D Isotropic E-Field Handheld Antenna
- Isotropic E-Field Antenna for the handheld spectrum analyzer
- Frequency range: (10) 30 MHz - 3 (3.3) GHz
- Light weight low attenuation radom
- Outer diameter approx. 150 mm
FSHPE, 9 kHz - 300 MHz, Single Axis E-Field Antenna
E-field, 9 kHz - 300 MHz, probe for handheld spectrum analyzer of all main manufacturers.
Usable with the following devices:
- Rohde und Schwarz FSH-Serie
- Agilent Fieldfox
- Anritsu Sitemaster, LMR-Master, Spectrum Master
- Aeroflex 9100 Handheld Spectrum Analyzer Series
- and many more...
FSHPH, 9 kHz - 300 MHz, Single Axis H-Field Antenna
H-field, 9 kHz - 300 MHz, probe for handheld spectrum analyzer of all main manufacturers.
Usable with the following devices:
- Rohde und Schwarz FSH-Serie
- Agilent Fieldfox
- Anritsu Sitemaster, LMR-Master, Spectrum Master
- Aeroflex 9100 Handheld Spectrum Analyzer Series
- and many more...
