CABFPS, Field Sensor Probe Stand
FPP2.3/1.5 M Field Probe Positioner
FPP2.3 Manual Field Probe Positioner
FPP2.3/1.5 Field Probe Positioner
Products
ABSOLUTE EMC Monopole Probe Stand
The original ABSOLUTE EMC MP-Probe Stand is explicitly designed for the EMC market. A low-cost and easy-to-use probe stand with no metallic parts. The EMC Monopole Probe Stand is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. No metal is used in any part of the stand. The field probe holders use PTEG plastic screws to hold the probe in place. The MP Probe Stand design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.
CABFPS, Field Sensor Probe Stand
The Conformity Assessment Business Field Sensor Probe Stand is designed for accurate placement of the field probe when carrying out testing to MIL STD 461, RTCA DO160, DEF STAN 59-411 and EN61000-4-3 (Where field monitoring is required)
FPP2.3/1.5 M Field Probe Positioner
FPP2.3/1.5 M Field Probe Positioner
- Single axial positioner for remote-controlled horizontal movement
- Moves 4 probes 4 times, supper fast 16 piont calibration
- Allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC61000-4-3.
- Automate uniform field calibration
- Load: 3.0 kg
FPP2.3 Manual Field Probe Positioner
FPP2.3 Manual Field Probe Positioner
- Allows for field probe placement according to EN61000-4-3 and IEC61000-4-3.
- Used for uniform field calibration
- Load: 3.0 kg
FPP2.3/1.5 Field Probe Positioner
FPP2.3/1.5 Field Probe Positioner
- Biaxial positioner for remote-controlled measurements at defined vertical areas
- Allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC61000-4-3.
- Automate uniform field calibration
- Load: 3.0 kg
