Categories

ANSI C63.4

OTHER PRODUCTS IN THE SAME STANDARD:

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.

  • High strength EPS 3lb per ft3
  • Low Permittivity >1.04
  • Made for moderate 200 lb.
  • Options
    • vinyl topper with your company logo 
    • epoxy coating for the top (can be combined with vinyl)

The Schwazbeck Biconical elements come in many sizes and offer different performances depending on what your needs are. For best low-frequency performance (good gain, low antenna factor), larger elements work better. The downfall of larger elements is handling or fitting in the test space. Many situations may not need outstanding performance with larger elements. The benefits of these elements and antenna baluns are that they all use the same connections (10mm), allowing for versatile sharing/switching of elements. No need to purchase a new antenna; get new elements.

 

The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.

  • High strength EPS 3lb per ft3
  • Low Permittivity >1.04
  • Made for high loading 500 lb.
  • Options
    • vinyl topper with your company logo (shown in picture)
    • epoxy coating for the top (can be combined with vinyl)

 

  • Quick find for Absolute EMC antennas
  • Run your mouse over the below images
  • Click on what you want to see

 

Broad-Band Horn Antenna

  • 15 - 26.5 (40) GHz
  • SMA-compatible connector

Loading...