Categories

ISO 11452-8

OTHER PRODUCTS IN THE SAME STANDARD:
MGA 1033; Magnetic Immunity DC-250 kHz, 800 Watts

The compact magnetic field generator and analyzer MGA 1033 allows susceptibility tests against magnetic fields from DC to 250 kHz according to the standard EN 55103-2 and their measurement according to EN 55103-1. In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.; Generation of magnetic fields from DC to 250 kHz; Field strength up to 1000 A/m; EN 55103-1/2, MIL-STD 461, Automotive etc.; Accessories: Loop sensors, Helmholtz coils etc.;

EMC EPS 5cm Sheets - low permittivity EUT Support for high frequency testing

The original EMC EPS 5CM Sheets are white Expanded Polystyrene with 10cm x 10cm indentations for easy measurements. It can be cut down to size with the included razor knife. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for the use in EMC testing for EUT and cable supports. The EMC EPS 5CM SHEETS are crush resistance able to withstand heavy weight loads without deforming. 1cm marking on the top side allows for easy positioning and test setups. Conveniently sold as sheets other sizes possible just ask. 

EMC EPS 70x150cm Support- EUT support

The original EMC EPS 70x150cm Support is white Expanded Polystyrene (EPS)

  • 150 x 100 x 70 cm.
  • Sit on top of a standard 80cm test table for a 150cm height
  • < 1.04 Permittivity
  • A new design can be pre-built or shipped flat, self-assembled, glued onsite

EMC EPS Block - 10 x 10 x 5 cm, EUT support

The original EMC EPS Block is white Expanded Polystyrene can optional be covered in a vinyl covering on top and sides or with a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Block is crush resistance able to withstand heavy weight loads without deforming. 1cm marking on 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.

FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop

  • Magnetic, handheld coil
  • 10 kHz - 3 MHz
  • diam. 133 mm
  • turns 9
  • Immunity testing to VG 95377 Part 13

FESP 5132 - DC - 150 kHz Radiating Loop

  • Magnetic, handheld coil
  • DC - 150 kHz
  • diam. 120 mm
  • turns 20
  • Immunity testing to: ISO 11452-8, MIL 461E RS101, EN 55103 5.18.3.2, IEC 61000-4-39

Loading...