Categories
-
Automotive +
- BMW GS 95002-3
- CISPR 12
- CISPR 25 (EN 55025)
- FMC1278
- FMC1280
- GM W 3097
- IEC 61851-21-1
- IEC 61851-23
- ISO 11452-2
- ISO 11452-3
- ISO 11452-4
- ISO 11452-5
- ISO 11452-8
- ISO 11452-9
- ISO 16750-2
- ISO 21498
- ISO 7637-2
- ISO 7637-3
- ISO 7637-4
- LV 123
- LV 124
- LV 148
- MBN 11123
- PSA B21 7112
- SAE J 1113/2
- SAE J1752/3
- UN ECE R10
- VW 80300
- VW 80303
-
Component +
-
International Product Standards +
- CISPR 14-1 (EN 55014-1)
- CISPR 14-2 (EN 55014-2)
- CISPR 15 (EN 55015)
- CISPR 22 (EN 55022)
- CISPR 24 (EN 55024)
- CISPR 25 (EN 55025)
- CISPR 32 (EN 55032)
- CISPR 35 (EN 55035)
- EN 55103
- IEC 60060-2
- IEC 60065
- IEC 61643-11
- IEC/EN 50561-1
- IEC/EN 50561-3
- IEC/EN 61000-4-20
- IEC/EN 61000-6-1
- IEC/EN 61000-6-2
- IEC/EN 61543
- ISO 14708-3
-
International Test Standards +
- ANSI C63.16 ESD
- ANSI C63.4
- ANSI C63.5
- ANSI/IEEE C62.41
- CISPR 16-1-1
- CISPR 16-1-2
- CISPR 16-1-4
- CISPR 17
- CISPR 22 (EN 55022)
- CISPR 32 (EN 55032)
- IEC 60
- IEC/EN 61000-3-11
- IEC/EN 61000-3-12
- IEC/EN 61000-3-2
- IEC/EN 61000-3-3
- IEC/EN 61000-4-10
- IEC/EN 61000-4-11
- IEC/EN 61000-4-12
- IEC/EN 61000-4-16
- IEC/EN 61000-4-18
- IEC/EN 61000-4-19
- IEC/EN 61000-4-2
- IEC/EN 61000-4-29
- IEC/EN 61000-4-3
- IEC/EN 61000-4-34
- IEC/EN 61000-4-39
- IEC/EN 61000-4-4
- IEC/EN 61000-4-5
- IEC/EN 61000-4-6
- IEC/EN 61000-4-8
- IEC/EN 61000-4-9
- IEEE 1309
-
Military & Avionics +
-
Safety +
-
Telecom/Wireless +
ITU-T G.9901
ITU-T G.9901 (06/2017)
Recommendation ITU-T G.9901 specifies the transmitted output voltage in the band 9-535 kHz, the control parameters that determine spectral content, power spectral density (PSD) mask requirements, a set of tools to support the reduction of the transmit PSD, the means to measure this PSD for transmission over power line wiring, as well as the allowable total transmit power into a specified termination impedance.
It also complements the system architecture, physical layer (PHY), and data link layer (DLL) specifications in Recommendations ITU?T G.9902 (G.hnem), ITU-T G.9903 (G3-PLC), and ITU-T G.9904 (PRIME).
This revision contains the following modifications:
· The output voltage limits set for the G.9902 FCC-2 bandplan have been extended to G.9903 technology and thus placed in the main body. Care has been taken to reference existing standards as much as possible.
· The clarification of the tone masking feature in Annex B.
- Line Impedance Stabilization Network
- 3 kHz - 148.5 kHz
- AMN Impedance: 1 Ω
- ITU-T G.9901
- TEMPEST AMN (LISN) Line Impedance Stabilization Network
- 9 kHz - 1 GHz
- Impedance (50Hz): 1.4 Ω
- AMN Impedance A or B: 50 Ω
