Test System for MIL-STD-641 CS114, CS115, CS116

• Automatic calibration for the whole test frequency range
• Application of all test frequencies automatically. The level can be selected or automatic.
• NO need to manually configure the measurement equipment
• NO need to manually integrate the transfer function of probes and attenuators
• Generation of test reports: NO need to record all values read from the measurement equipment
• Generation of calibration reports: NO need to record all calibration setting parameters
• Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)

• 80Hz to 3.5GHz Bandwidth
• Pulse or CW analog signals
• Up to 1km Tx/Rx distance
• Battery Powered

Support arm with balancer for ESD test station

• The only support arm is made from non-metal 
• 1.5" Fiberglass Tubes,
• 3D Printed: Cage, holder, base
• Custom ESD simulator adaption
• Balancer is plastic housing and string (only the spring is metallic)
• Only the system meets the metal-free area requirements of standards
• Support arm with the carriage
• 360 degrees pivotable
• Customized attachment to the table included

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

• 80Hz to 3.5GHz Bandwidth
• Pulse or CW analog signals
• Up to 1km Tx/Rx distance
• Battery Powered

• DC to 500 MHz Bandwidth
• Pulse or CW analog signals
• Up to 1km Tx/Rx distance
• Battery Powered

• DC to 25 MHz Bandwidth
• Pulse or CW analog signals
• Up to 1km Tx/Rx distance
• Battery Powered

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
• Measure 4 lines of 3 phase LISN
• The picture is shown with internal LISN [EMSCOPE RX4 LZ2]