CDG 7000 Conducted Immunity, 10 kHz - 400MHz
BLS SU 600, Matrix Switching Unit
CDG 7000-E Conducted Immunity Generator, (4)9 kHz - 1 GHz , No internal Amplifier
FIS 100-200 Fast Interrupt Switch 100V/200Amps
CDG 7000-75-10 Magnetic & Conducted Immunity, 10 kHz - 250MHz
400 - 6112, 2-Ch, 250kS/s, AnyWave Control Unit
400 - 6361, 2-Ch, 2.8MS/s, AnyWave Control Unit
100-TS, 4-Quadrant Voltage Amplifiers 400 W - 54,000 W
100-TS, 4-Quadrant Current Amplifiers 400 W - 54,000 W
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
Products
BOLAB ISO 21498 HV Test System & Ripple Generator
- Advanced Ripple Testing: Meets ISO 21498, LV123, VW 80300, Nissan MES PW 67602, Mazda, and emerging standards.
- Series Amplifier Integration: High accuracy ripple injection, minimal distortion, and enhanced safety.
- Waveform Versatility: Sine, square, trapezoidal, pulses, and triangle waveform generation.
- WaveMaster Software: Fast DUT impedance measurement, automated test sequences, and dynamic voltage/current control.
- High Power Capability: Ripple Voltage up to 100 Vpp, currents from 100A to 2000A+, and frequency range 10 Hz–300+ kHz.
- Future-Proof Design: Modular architecture for easy upgrades and adaptation to new standards.
CDG 7000 Conducted Immunity, 10 kHz - 400MHz
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.
BLS SU 600, Matrix Switching Unit
- Protocol reports
- Generation of waveforms with synchronous data acquisition
- Modular Expandable
- Individual Waveform Generation
- Standard Libraries included
- Unlimited Waveform size
- 2 different Waveforms synchronously
- DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
- Simulation of imported oscilloscope waveform
CDG 7000-E Conducted Immunity Generator, (4)9 kHz - 1 GHz , No internal Amplifier
The CDG 7000-E is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application.
- The compact device comprises an RF signal generator, a 3-channel RF voltmeter, and a directional coupler.
- Frequency range of the generator/power meter (4 kHz): 9 kHz – 1200 MHz
- The frequency range of the directional coupler: 10 kHz – 1000 MHz, 200 W
- Depending on ext. amplifier: IEC/EN 61000-4-6, IEC 60601-1-2 Ed. 4.1, IEC 61000-4-39, MIL 461 CS 114, ISO 11452-4, ...
FIS 100-200 Fast Interrupt Switch 100V/200Amps
- High current power stage (uni-directional)
- Up to 32 channels for switching low-current signals (bi-directional)
- Switching of resistive, inductive, capacitive passive, and active loads/devices
- Input voltage up to 100V
- Output current up to 200A DC
CDG 7000-75-10 Magnetic & Conducted Immunity, 10 kHz - 250MHz
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.
400 - 6112, 2-Ch, 250kS/s, AnyWave Control Unit
WaveMaster + AnyWave
BOLAB WaveMaster software and the BOLAB AnyWave control unit allow the control of power supplies as well as 4 quadrant amplifiers via the analog interfaces.
The powerful and easy-to-use BOLAB WaveMaster software is unique in the world. Without any knowledge in software development, designing ordinary and complex waveforms is very easy. A graphic waveform editor allows the generation
of individual curves in no time. Also, with tabular input, all types of waveforms can be produced instantly.
400 - 6361, 2-Ch, 2.8MS/s, AnyWave Control Unit
WaveMaster + AnyWave
BOLAB WaveMaster software and the BOLAB AnyWave control unit allow the control of power supplies as well as 4 quadrant amplifiers via the analog interfaces.
The powerful and easy-to-use BOLAB WaveMaster software is unique in the world. Without any knowledge in software development, designing ordinary and complex waveforms is very easy. A graphic waveform editor allows the generation
of individual curves in no time. Also, with tabular input, all types of waveforms can be produced instantly.
100-TS, 4-Quadrant Voltage Amplifiers 400 W - 54,000 W
- DC - 200 kHz bandwidth DC
- MHz (small signal -3 dB)
- Output voltage ±75 Vpk
- Rise / fall time 100 V/µs
- USB interface standard, LAN optional
- Analog control input 0 ... ±10 V for control of voltage and current
- Monitor outputs for measured voltage and current values (not all models)
- Modularly extensible via master-slave mode
- Parallel and Series Connections for two or more units
100-TS, 4-Quadrant Current Amplifiers 400 W - 54,000 W
- DC - 200 kHz bandwidth DC
- MHz (small signal -3 dB)
- Output voltage ±75 Vpk
- Rise / fall time 100 V/µs
- USB interface standard, LAN optional
- Analog control input 0 ... ±10 V for control of voltage and current
- Monitor outputs for measured voltage and current values (not all models)
- Modularly extensible via master-slave mode
- Parallel and Series Connections for two or more units
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
AN-Series is an artificial Network that electrically recreates the vehicular power-net impedance for component tests of voltage class B (high voltage) components in laboratories and test benches. The AN-Series uses an analog system with a bandwidth covering up to 150 kHz. An artificial network like the AN-Series is crucial for the proper testing of all voltage class B components in both hybrid and electric vehicles.
In accordance with LV123, ISO 21498, MBN 11123, VW 80300, and IEC 61851-23.
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
AN-Series is an artificial Network that electrically recreates the vehicular power-net impedance for component tests of voltage class B (high voltage) components in laboratories and test benches. The AN-Series uses an analog system with a bandwidth covering up to 150 kHz. An artificial network like the AN-Series is crucial for the proper testing of all voltage class B components in both hybrid and electric vehicles.
In accordance with LV123, ISO 21498, MBN 11123, VW 80300, and IEC 61851-23.
