NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160
NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160
NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
CMDM 8700 B Common mode / Differential mode switch
CAP 10-100 & CAP 10-200, 10 µF Capacitor for DO-160 and DEF-STAN-59
VTSD 9561 F, 10dB, Diode Pulse Limiter
VTSD 9561 D, 20dB, Diode Pulse Limiter
Products
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN
- Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, DO 160, MIL-STD, or ISO 7637-2
- impedance (5µH + 1 Ohm) || 50 Ohm
- 70 A, 1000 V (DC)
- Switchable 50Ohm Load on measurement port
- 1 microfarad capacitor to ground on AE side
- BNC-jack (Type N option)
NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160
- Measurement of interference voltage in vehicles, aircraft, and ships
- 10 kHz - 400 MHz
- 1500VDC / 650VAC up to 400Hz
- Max current 200A, (280A limited time)
- Impedance of each path: 5 µH || 50 Ω ±20 %
NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160
- Measurement of interference voltage in vehicles, aircraft, and ships
- (1)10 kHz - 400 MHz
- 600VDC / 530VAC up to 400 Hz, 270VAC up to 890 Hz
- Max current 70A, (100A limited time)
- Impedance of each path: 5 µH || 50 Ω ±20 %
NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
- Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
- impedance (5µH + 1 Ohm) || 50 Ohm
- 200 A, 1000 V (DC)
- Switchable 50Ohm Load on measurement port
- 1 microfarad capacitor to ground on AE side
- BNC-jack (Type N option)
CMDM 8700 B Common mode / Differential mode switch
The measurement mode switch CMDM 8700 B expands the measurement possibilities of two V-LISN to T- and Delta-LISNs for the profound analysis of interference emissions.
CAP 10-100 & CAP 10-200, 10 µF Capacitor for DO-160 and DEF-STAN-59
To be compliant to the standards DEF STAN 59 and DO 160 a 10 μF capacitor like the CAP 10 has to be connected to the mains connectors of the LISN.
VTSD 9561 F, 10dB, Diode Pulse Limiter
Diode Pulse Limiter with built-in 10 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
VTSD 9561 D, 20dB, Diode Pulse Limiter
Diode Pulse Limiter with built-in 20 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
