Call For More Details: +1 (703) 774-7505
Phone : +1 (703) 774-7505
Audio, video and similar electronic apparatus - Safety requirements
IEC 60065:2014 applies to electronic apparatus designed to be fed from the mains, from a supply apparatus, from batteries or from remote power feeding and intended for reception, generation, recording, or reproduction of audio, video, and associated signals. It also applies to an apparatus designed to be used exclusively in combination with the above-mentioned apparatus. This standard primarily concerns apparatus intended for household and similar general use but which may also be used in places of public assembly such as schools, theatres, places of worship and the workplace professional apparatus intended for use as described above is also covered unless falling specifically within the scope of other standards. This standard:
- concerns only safety aspects of the above apparatus;
- it does not concern other matters, such as style or performance. This standard applies to the above-mentioned apparatus if designed to be connected to the telecommunication network or similar network, for example by means of an integrated modem. This eighth edition cancels and replaces the seventh edition published in 2001 including its Amendment 1 (2005) and Amendment 2 (2010). It constitutes a technical revision. The principal changes in this edition as compared with the seventh edition are as follows:
- new requirements for wall and ceiling mounting means;
- new requirements for coin/button cell batteries;
- all notes have been reviewed to comply with the new directives;
- addition of requirements for LEDs;
- requirements for creepage distances are aligned with IEC 60950-1 and a change in optocoupler requirements.
The High-Voltage Pulse Generator IPG 1201 is designed for testing of impulse dielectric strength of components, insulation, air- and surface flashover gaps. It is specially used for testing surge withstand capability of insulation between accessible parts and hazardous live parts, e.g. terminals for connection of antenna and mains supply terminals, refer to EN 60065. Picture: incl. Option PA 503