CABAI20050, 200W, 50 A, 2:1, Audio Isolation Transformer
MAG 1000, 120A/m CW, 1100Am Short Duration, Power Frequency Magnetic Field
MGA 1033; Magnetic Immunity DC-250 kHz, 800 Watts
CABCI250R, 200W, 0.5 Ohm Shunt Resistor
CABCI251R, 200W, 1.0 Ohm Shunt Resistor
HI 200, 1m x 1m Magnetic Immunity Coil for use with HILO/TEST
NFCN 1356, 1356 kHz Compensation Network for HFRA 5164
HS 5136 - Hall-Sensor
NFCN 9734 - DC- 200 kHz Compensation Network
SHUNT 9571 Precision High Power Current Shunt
CP 9610 - DC - 1 MHz Galvanically Isolated Current Sensor
Products
CDG 7000-75-10 Magnetic & Conducted Immunity, 10 kHz - 250MHz
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.
CABAI20050, 200W, 50 A, 2:1, Audio Isolation Transformer
Audio Transformer 200W, 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz - 250 kHz
- 100 W Maximum at15 Hz - 30 Hz
- Insulation Resistance Test - 2kV
MAG 1000, 120A/m CW, 1100Am Short Duration, Power Frequency Magnetic Field
MAG 1000
- 1-120A/m Contiunus testing
- 100-1100A/m Short Duration 1-3sec
- Test either 50Hz & 60Hz Selectable
- 1m square Loop
MGA 1033; Magnetic Immunity DC-250 kHz, 800 Watts
The compact magnetic field generator and analyzer MGA 1033 allows susceptibility tests against magnetic fields from DC to 250 kHz according to the standard EN 55103-2 and their measurement according to EN 55103-1. In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.; Generation of magnetic fields from DC to 250 kHz; Field strength up to 1000 A/m; EN 55103-1/2, MIL-STD 461, Automotive etc.; Accessories: Loop sensors, Helmholtz coils etc.;
CABCI250R, 200W, 0.5 Ohm Shunt Resistor
0.5 Ohm 1% Shunt Resistor, 200W
- used in MIL-STD, FORD, and other standards
- Low Inductance
- High Precision
CABCI251R, 200W, 1.0 Ohm Shunt Resistor
1.0 Ohm 1% Shunt Resistor, 200W
- used in MIL-STD, FORD, and other standards
- Low Inductance
- High Precision
HI 200, 1m x 1m Magnetic Immunity Coil for use with HILO/TEST
Power frequency magnetic fields acc. to IEC 61000-4-8 Test levels continuous 3 / 10 / 30 / 100 / 300 A/m. Test level 1000 A/m short, with a special transformer. Pulsed magnetic fields acc. to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m
NFCN 1356, 1356 kHz Compensation Network for HFRA 5164
- Compensation Network
- For HFRA 5164
- up to 26 A/m @ 50 Watts
- 13.56 MHz
HS 5136 - Hall-Sensor
- Nominal frequency range: DC - 1 kHz
- Nominal measuring range: 0 - 7000 A/m
- Extended measuring range: 0 - 9000 A/m
- Nominal conversion factor: 1 (A/m)/mV
NFCN 9734 - DC- 200 kHz Compensation Network
- Compensation Network
- For: HHS 5206-16, HHS 5204-12, HHS 5202-9
- up to 32 Arms
- DC - 200 kHz
SHUNT 9571 Precision High Power Current Shunt
- Low inductive precision high power shunt
- 1 x 0.25 Ohm / 800 W
- 1 x 1 Ohm / 800 W
- 2 x 0.5 Ohm / 400 W
- Use for many applications including meeting MIL-STD-461 requirements
CP 9610 - DC - 1 MHz Galvanically Isolated Current Sensor
- Galvanically Isolated Current Sensor
- It can be used to measure currents in case a shunt is not allowed (Ford EMC-CS- 2009), including 1m RG223/U BNC-BNC
- DC – 1 MHz
- 210 VPK / VDC
- -40 A - +40 A
