Categories

DO-160 (RTCA)

OTHER PRODUCTS IN THE SAME STANDARD:
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN

  • Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, DO 160, MIL-STD, or ISO 7637-2
  • impedance (5µH + 1 Ohm) || 50 Ohm
  • 70 A, 1000 V (DC)
  • Switchable 50Ohm Load on measurement port
  • 1 microfarad capacitor to ground on AE side
  • BNC-jack (Type N option)

High Power Biconical Antenna Kits (HPBK)

The Schwarzbeck line of biconical antennas is ideally suited for EMC testing. The interchangeable design can be paired easily with different elements for different applications. The kits offered here make the selection process simple and straight forward. Testing < 150 MHz and at 1 or 3 meters in the near field of each antenna becomes difficult to predict, especially in small chambers. 

The use of these kits gives many antenna options in a single solution. With the alternative element options, the possibility of finding a better match to your chamber and requirements increases.  

NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160

  • Measurement of interference voltage in vehicles, aircraft, and ships
  • 10 kHz - 400 MHz
  • 1500VDC / 650VAC up to 400Hz
  • Max current 200A, (280A limited time)
  • Impedance of each path: 5 µH || 50 Ω ±20 %

NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160

  • Measurement of interference voltage in vehicles, aircraft, and ships
  • (1)10 kHz - 400 MHz
  • 600VDC / 530VAC up to 400 Hz, 270VAC up to 890 Hz
  • Max current 70A, (100A limited time)
  • Impedance of each path: 5 µH || 50 Ω ±20 %

SY3-EMC, 30 - 200 MHz, 2500 Watts, Tuned Yagi

The SteppIR SY3-EMC Auto-tuned Yagi system is the solution to MIL-STD-461G and RS-103 for radiated susceptibility testing over the 30-200 MHz frequency range – making it the only system in the world that can legitimately claim to reach or exceed the required 200 V/m @1 Meter, at the fundamental frequency.

SHUNT 9571 Precision High Power Current Shunt

  • Low inductive precision high power shunt
  • 1 x 0.25 Ohm / 800 W
  • 1 x 1 Ohm / 800 W
  • 2 x 0.5 Ohm / 400 W
  • Use for many applications including meeting MIL-STD-461 requirements

Loading...