Standards

Products

EMC9145, 9 kHz - 1 GHz, 45dB gain, Low Noise Preamplifier

  • 9 kHz - 1 GHz, 45dB Gain, 1.8dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

EMC9135, 9 kHz - 1 GHz, 35dB gain, Low Noise Preamplifier

  • 9 kHz - 1 GHz, 35dB Gain, 2.5dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

EMC003835B, 30 MHz - 8 GHz, 35dB gain, Low Noise Preamplifier

  • 30 MHz - 8 GHz, 35dB Gain, 3dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

EMC1640, 1 - 6 GHz, 40dB gain, Low Noise Preamplifier

  • 1 - 6 GHz, 40dB Gain, 2.5dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

EMC01640A, 10 MHz - 6 GHz, 40dB gain, Low Noise Preamplifier

  • 10 MHz - 6 GHz, 40dB Gain, 2.5dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

EMC001340, 10 kHz - 3 GHz, 40dB gain, Low Noise Preamplifier

  • 10 kHz - 3 GHz, 40dB Gain, 6dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

EMC001330, 10 kHz - 3 GHz, 30dB gain, Low Noise Preamplifier

  • 10 kHz - 3 GHz, 30dB Gain, 6dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

CG50/500ML & MLA, 50 kHz - 30 MHz, 50 and 500 kHz Steps, Conducted Comb Generator

  • Broad verification coverage: 50 kHz to 108 MHz for conducted-emissions setups.
  • Radiated reference output from 50 kHz to 30 MHz when used with the monopole antenna.
  • Selectable 50 kHz and 500 kHz comb spacing for different receiver spans and measurement tasks.
  • Internal rechargeable battery supports portable use and reduces external-cable influence during checks.
  • 50 ohm BNC female output simplifies connection to common EMC measurement accessories.
  • Useful for daily or periodic chamber, receiver, cable, LISN, and accessory verification.

ABSOLUTE EMC TP-Ball Head For Tripod or Monopole

The ABSOLUTE EMC TP-Ball Head is designed to mount a camera or other lightweight item with complete position control. Constructed of PLA plastic, only the 1/4"-20 screw is metal. This rugged adaptor is a good match with the ABSOLUTE EMC Tripod or monopole. 

ABSOLUTE EMC TP-Cable Support For Tripod or Monopole

The ABSOLUTE EMC TP-Cable Support is designed to hold wires, Coax, or waveguide parallel to the ground. This is useful in some cases for test setups where the antenna cable needs to be held back and away from the test area. Or in cases where EUT wires can not bend and need to be held up off the floor. Constructed of PLA plastic, slots for feeding velcro straps or zip-ties, and includes velcro straps to tie down cables or a 1m EPS bar. This rugged cable tray is a good match with the ABSOLUTE EMC Tripod or monopole. 


Loading...