Categories

CISPR 16-1-2

OTHER PRODUCTS IN THE SAME STANDARD:
EMSCOPE Click Meter for CISPR 14-1

Turn your EMSCOPE receiver into a click meter for discontinuous conducted disturbances. The optional software license supports simultaneous line/neutral testing, four measurement frequencies, click statistics and automated PDF reports. Available for EMSCOPE, EMSCOPE-RX2, EMSCOPE-RX4 and EMSCOPE-RX4LZ2.

NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN

  • Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, DO 160, MIL-STD, or ISO 7637-2
  • impedance (5µH + 1 Ohm) || 50 Ohm
  • 70 A, 1000 V (DC)
  • Switchable 50Ohm Load on measurement port
  • 1 microfarad capacitor to ground on AE side
  • BNC-jack (Type N option)

NSLK 8117, 9 kHz - 30 MHz, 250V / 10A, 50 µH, 2 Path LISN

  • Low cost 2 path LISN 
  • Line Impedance Stabilisation Network
  • Connector: CEE 7/4 
  • 9 kHz to 30 MHz
  • 250 VAC, 350 VDC, 10 A 
  • (50 µH+5 Ω) || 50 Ω   
  • CISPR 16-1-2

NSLK 8127, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 2 Path LISN

  • 2 path LISN (Single-Phase)
  • Line Impedance Stabilisation Network
  • Connector: CEE 7/4 
  • 9 kHz to 30 MHz
  • 250 VAC, 400 VDC, 16 A 
  • (50 µH+5 Ω) || 50 Ω   
  • CISPR 16-1-2

NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
  • impedance (5µH + 1 Ohm) || 50 Ohm
  • 200 A, 1000 V (DC)
  • Switchable 50Ohm Load on measurement port
  • 1 microfarad capacitor to ground on AE side
  • BNC-jack (Type N option)

NSLK 8126, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 4 Path LISN

  • High Current 4 path LISN (3-Phase & Single-Phase)
  • Line Impedance Stabilisation Network
  • Connector: CEE plug (IEC 60309) & CEE 7/4 
  • 9 kHz to 30 MHz
  • 250/400 VAC, 400 VDC, 16 A (16A for CEE 7/4)
  • (50 µH+5 Ω) || 50 Ω   
  • CISPR 16-1-2

Loading...