CAB134k Coupling Network for 134kHz
CAB1356m Coupling Network for 13.56 MHz
CABCI250R, 200W, 0.5 Ohm Shunt Resistor
CABCI251R, 200W, 1.0 Ohm Shunt Resistor
NFCN 1356, 1356 kHz Compensation Network for HFRA 5164
HS 5136 - Hall-Sensor
NFCN 9734 - DC- 200 kHz Compensation Network
SHUNT 9571 Precision High Power Current Shunt
CP 9610 - DC - 1 MHz Galvanically Isolated Current Sensor
NFCN 9731-100, DC- 180 Hz Compensation Network for HHS 5230-100
NFCN 9732-85, 80 - 90 kHz Compensation Network for HHS 5206-8
Products
CABAI20050, 200W, 50 A, 2:1, Audio Isolation Transformer
Audio Transformer 200W, 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz - 250 kHz
- 100 W Maximum at15 Hz - 30 Hz
- Insulation Resistance Test - 2kV
CAB134k Coupling Network for 134kHz
Coupling Network for 134kHz
- It matches 50 Ohm amplifier
- Use with CAB4-3912 loop antenna
- Can work with other similar antennas
- Type N f-n connectors attached directly to loop
CAB1356m Coupling Network for 13.56 MHz
Coupling Network for 13.56 MHz
- It matches 50 Ohm amplifier
- Use with CAB4-3910 loop antenna
- Can work with other similar antennas
- Type N f-n connectors attached directly to the loop
CABCI250R, 200W, 0.5 Ohm Shunt Resistor
0.5 Ohm 1% Shunt Resistor, 200W
- used in MIL-STD, FORD, and other standards
- Low Inductance
- High Precision
CABCI251R, 200W, 1.0 Ohm Shunt Resistor
1.0 Ohm 1% Shunt Resistor, 200W
- used in MIL-STD, FORD, and other standards
- Low Inductance
- High Precision
NFCN 1356, 1356 kHz Compensation Network for HFRA 5164
- Compensation Network
- For HFRA 5164
- up to 26 A/m @ 50 Watts
- 13.56 MHz
HS 5136 - Hall-Sensor
- Nominal frequency range: DC - 1 kHz
- Nominal measuring range: 0 - 7000 A/m
- Extended measuring range: 0 - 9000 A/m
- Nominal conversion factor: 1 (A/m)/mV
NFCN 9734 - DC- 200 kHz Compensation Network
- Compensation Network
- For: HHS 5206-16, HHS 5204-12, HHS 5202-9
- up to 32 Arms
- DC - 200 kHz
SHUNT 9571 Precision High Power Current Shunt
- Low inductive precision high power shunt
- 1 x 0.25 Ohm / 800 W
- 1 x 1 Ohm / 800 W
- 2 x 0.5 Ohm / 400 W
- Use for many applications including meeting MIL-STD-461 requirements
CP 9610 - DC - 1 MHz Galvanically Isolated Current Sensor
- Galvanically Isolated Current Sensor
- It can be used to measure currents in case a shunt is not allowed (Ford EMC-CS- 2009), including 1m RG223/U BNC-BNC
- DC – 1 MHz
- 210 VPK / VDC
- -40 A - +40 A
NFCN 9731-100, DC- 180 Hz Compensation Network for HHS 5230-100
- Compensation Network
- For HHS 5230-100
- up to 8 Arms
- DC - 180 kHz
NFCN 9732-85, 80 - 90 kHz Compensation Network for HHS 5206-8
- Compensation Network
- For HHS 5206-8
- up to 11 Arms
- 80 - 90 kHz (85 kHz)
