EPS Test Table - low permittivity for high frequency testing
ABSOLUTE EMC Monopole Probe Stand
CABFPS, Field Sensor Probe Stand
EMC EPS 5cm Sheets - low permittivity EUT Support for high frequency testing
AM 9144 - Modular Antenna Mast
Absolute EMC Tripod
Absolute EMC Monopole Antenna Stand
Absolute EMC Bar Clamp
LAS-2000 Loop Antenna Stand
PDG 9211 - Polarization swivel fixture
AA 9202 Mast Adapter for Antenna Mast System AM 9144
Products
EPS Test Table Lt - low permittivity for high frequency testing
- The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for moderate 200 lb.
- Options
- vinyl topper with your company logo
- epoxy coating for the top (can be combined with vinyl)
EPS Test Table - low permittivity for high frequency testing
The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for high loading 500 lb.
- Options
- vinyl topper with your company logo (shown in picture)
- epoxy coating for the top (can be combined with vinyl)
ABSOLUTE EMC Monopole Probe Stand
The original ABSOLUTE EMC MP-Probe Stand is explicitly designed for the EMC market. A low-cost and easy-to-use probe stand with no metallic parts. The EMC Monopole Probe Stand is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. No metal is used in any part of the stand. The field probe holders use PTEG plastic screws to hold the probe in place. The MP Probe Stand design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.
CABFPS, Field Sensor Probe Stand
The Conformity Assessment Business Field Sensor Probe Stand is designed for accurate placement of the field probe when carrying out testing to MIL STD 461, RTCA DO160, DEF STAN 59-411 and EN61000-4-3 (Where field monitoring is required)
EMC EPS 5cm Sheets - low permittivity EUT Support for high frequency testing
The original EMC EPS 5CM Sheets are white Expanded Polystyrene with 10cm x 10cm indentations for easy measurements. It can be cut down to size with the included razor knife. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for the use in EMC testing for EUT and cable supports. The EMC EPS 5CM SHEETS are crush resistance able to withstand heavy weight loads without deforming. 1cm marking on the top side allows for easy positioning and test setups. Conveniently sold as sheets other sizes possible just ask.
AM 9144 - Modular Antenna Mast
The double telescopic antenna mast/tripod is continuously height-adjustable. The mast rods are made of glass fiber to avoid unwanted reflexions. The modular design makes it possible to use different telescope parts and it can be mounted on a mast foot made of stainless steel or one made out of low-reflective fiberglass. Both of them provide a secure stand and easy adjustment on uneven ground. Antennas or adapters can be mounted on the 3/8" male thread.
Absolute EMC Tripod
- Non-Metallic Design: All parts are non-metallic except the antenna connection screw, ensuring minimal interference in EMC testing.
- 3D-Printed PLA & Hardwood Construction: Includes 1" hardwood dowels that are adjustable up to 3 feet; fiberglass dowels are also available.
- Height Adjustability: Ranges from 37" to 68" using a 1-inch center mast.
- Stability: Comes with leveling feet and an optional weight ballast to ensure stability.
Absolute EMC Monopole Antenna Stand
The original ABSOLUTE EMC Monopole is specifically designed for the EMC market as a low-cost, easy-to-use solution with no metallic parts except for the antenna connection screw. It's easy to assemble and fully adjustable in height using the center mast section. Made from low permittivity materials, it's ideal for various EMC applications like holding antennas, cameras, RF field probes, and keeping cables off the floor. The monopole's compact design allows for easy maneuverability and reduces tripping hazards compared to tripods. Plus, any plastic pieces that break will be replaced free of charge for the life of the product.
Absolute EMC Bar Clamp
The ABSOLUTE EMC Bar Clamp is specifically designed for the EMC market, providing a low-cost, easy-to-use solution with no metallic parts. It is highly adjustable, reliable, and ideal for various EMC testing applications. The EMC Bar Clamp is made from low permittivity materials, making it suitable for holding tables together or securing the DUT/EUT in position during testing.
LAS-2000 Loop Antenna Stand
The Loop Antenna Stand is an advanced antenna support device designed to meet the demands of diverse signal requirements, featuring three primary functions: elevation adjustment, horizontal/vertical orientation, and a 180-degree rotation capability.
PDG 9211 - Polarization swivel fixture
The polarisation swivel fixture PDG 9211 allows changing the polarisation of larger horn antennas by a single person easily. With the four locking points, the antenna can snap in increments of 90° angles to horizontal or vertical polarisation.
AA 9202 Mast Adapter for Antenna Mast System AM 9144
Mast Adapter for Antenna Mast System AM 9144 with 22 mm hole for most Antenna models.
- 3/8" and 1/4" camera threads
- polarisation continuously adjustable
