EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver
EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase
AB-Precompliant Test Kits
EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner
EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner
EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner
NFPKIT, EM Near Field Probe Kit w/Camera & Software
RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz
Harmonics & Flicker Test System 30kVA (43A) & 50kVA (75A) 1 & 3-Phase
EMScannerR+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner
EMScanner+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner
Products
EMSCOPE, 9kHz - 110MHz, 2 channel Receiver/LISN
Measure line and neutral conducted emissions with a two-channel FFT EMI receiver and built-in 16 A single-phase LISN. EMSCOPE supports common-mode and differential-mode analysis for filter development, with 30 MHz base coverage and an available 110 MHz upgrade. Add the optional CISPR 14-1 click meter license for discontinuous disturbance testing.
EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver
Pair EMSCOPE-RX2 with the external LISN your application requires. This two-channel FFT EMI receiver measures conducted emissions and separates common-mode and differential-mode noise, with 30 MHz base coverage and an available 110 MHz upgrade. A CISPR 14-1 click meter license is optional.
EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase
Measure three-phase conducted emissions and investigate common/differential-mode noise with the four-channel EMSCOPE platform. Choose RX4 for external-LISN testing or RX4LZ2 for an added built-in 16 A single-phase LISN. Three-phase testing uses a suitable external network. Click meter and frequency upgrades are available.
AB-Precompliant Test Kits
Absolute EMC has designed low-cost pre-compliance systems to meet a wide range of RF emissions and immunity needs. Some form of pre-complaint testing is a must for any company that needs to demonstrate their product for EMC compliance. This enables companies to be responsive when issues happen and to also be proactive before going to the lab to better your chances of passing the first time.
EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner
150 kHz to 8 GHz | External spectrum analyzer | 1,218-probe array
EMScanner helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. A fixed array of 1,218 magnetic-field probes gives fast coverage, with 7.5 mm physical spacing and a manufacturer-stated 3.75 mm effective resolution. Use it with a compatible external spectrum analyzer and a PC running EMViewer.
EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner
150 kHz to 8 GHz | External spectrum analyzer | Down to 0.06 mm
EMScannerR helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. Its eight selectable resolution levels run from 7.5 mm down to 0.06 mm for detailed investigation of dense boards. Use it with a compatible external spectrum analyzer and a PC running EMViewer.
EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner
Component-side scanning | Adjustable probe height | External analyzer
EMProbe automates a handheld near-field probe over the component side of a PCB or around a non-flat assembly. Program scan height and position in EMViewer, then acquire RF measurements with a compatible external spectrum analyzer. The compact arm is suited to repeatable bench investigations, with larger arm or extension configurations available for application-specific work.
NFPKIT, EM Near Field Probe Kit w/Camera & Software
5 E/H-field probes | Camera tracking | Live EMI visualization
NFP Kit adds camera-based position tracking to handheld near-field measurements. EMViewer recognizes the probe and measurement location from visible markers, helping engineers map emission sources while moving the probe by hand. The kit combines five electric/magnetic probes, a camera, mounting arm and measurement software with your compatible spectrum analyzer.
RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz
- Frequency Range of 300 MHz to 6.0 GHz
- Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns
- Near-field insights such as Amplitude and Phase distribution are available in seconds
- Gain, Efficiency, and S11 chart with Supported VNAs
- “Real-time” real-fast
- Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas).
- Simple set up and Easy to use
Harmonics & Flicker Test System 30kVA (43A) & 50kVA (75A) 1 & 3-Phase
- Full IEC/EN 61000-3-X Compliance – Covers harmonics and flicker testing.
- High-Power Testing – Supports loads up to 75 A and 50 kVA.
- Regenerative Power Supply – Efficient energy recovery system.
- Programmable AC Simulation – Adjustable voltage, frequency, and transients.
- Precision Power Analyzer – Ensures accurate compliance verification.
- Automated Software Control – Simplifies testing with real-time monitoring.
- Versatile Applications – Ideal for appliance, automotive, renewable energy, and aerospace industries.
EMScannerR+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner
150 kHz to 6 GHz | Internal spectrum analyzer | Down to 0.06 mm
EMScannerR+ helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. Its eight selectable resolution levels run from 7.5 mm down to 0.06 mm for detailed investigation of dense boards. The internal spectrum analyzer simplifies the measurement setup; a user PC runs EMViewer.
EMScanner+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner
150 kHz to 6 GHz | Internal spectrum analyzer | 1,218-probe array
EMScanner+ helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. A fixed array of 1,218 magnetic-field probes gives fast coverage, with 7.5 mm physical spacing and a manufacturer-stated 3.75 mm effective resolution. The internal spectrum analyzer simplifies the measurement setup; a user PC runs EMViewer.
