Helmholtz Coils Overview
Coil Set 4-39_9k-150k EN 61000-4-39 & RS101 9kHz - 150kHz, Tx & Rx Set
MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM
Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set
FMZB 1519 C Active Receiving Loop Antenna
FMZB 1519-60D Active Receiving Loop Antenna
CAB134k Coupling Network for 134kHz
CAB1356m Coupling Network for 13.56 MHz
HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna
FESP 5139 - DISCONTINUED replaced by HFRA 5164
FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop
Products
MAG 1000, 120A/m CW, 1100Am Short Duration, Power Frequency Magnetic Field
MAG 1000
- 1-120A/m Contiunus testing
- 100-1100A/m Short Duration 1-3sec
- Test either 50Hz & 60Hz Selectable
- 1m square Loop
Helmholtz Coils Overview
Helmholtz Coils Overview see below
Coil Set 4-39_9k-150k EN 61000-4-39 & RS101 9kHz - 150kHz, Tx & Rx Set
Low-Frequency Transmit Coil (CAB4-3912)
- Frequency: 9 kHz to 150 kHz
- Main Diameter: 120 mm
- Maximum Current: 15 A
- Number of turns: 20
Low-Frequency Sense Coil (CABLSLF)
- Frequency: 9 kHz to 150 kHz
- Diameter to center of the coil: 40 mm
- Number of turns: 51
- Wire type: 7/41 LITZ
- Winding Type: Electrostatically shielded
MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM
The MF EASY is a scalable and flexible multichannel measurement and assessment system for magnetic fields in the frequency range DC – 400 kHz. It is available with 5 or 10 (on request up to 15) fully isotropic measurement channels enabling simultaneous magnetic field measurements on 5 or 10 (15) measurement positions.
Different standard probe types (sizes and shapes) are available for the MF EASY. Customized probes are available on request. Iso-centrically arranged coil and Hall sensor enable a measurement frequency range from DC to 400 kHz and a measurement sensitivity suitable for assessing human exposure.
Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set
High-Frequency Transmit Coil (CAB4-3910)
- Frequency: 150 kHz to 26 MHz
- Main Diameter: 100 mm
- Number of Turns: 3
- Wire Diameter: 1mm
- Connection type: ‘N’ type Coaxial
High-Frequency Sense Coil (CABLSHF)
- Frequency: 150 kHz to 26 MHz
- Diameter to center of the coil: 41 mm
- Number of turns: 1
- Wire type: 1mm single core
- Winding Type: Electrostatically shielded
FMZB 1519 C Active Receiving Loop Antenna
Active, shielded Loop Antenna with nearly constant antenna factor over the entire frequency range (9 kHz - 30 MHz), battery-driven to minimize disturbance influence from the power line.
FMZB 1519-60D Active Receiving Loop Antenna
Active, shielded Loop Antenna with nearly constant antenna factor over the entire frequency range (9 kHz - 30 MHz), battery-driven to minimize disturbance influence from the power line.
CAB134k Coupling Network for 134kHz
Coupling Network for 134kHz
- It matches 50 Ohm amplifier
- Use with CAB4-3912 loop antenna
- Can work with other similar antennas
- Type N f-n connectors attached directly to loop
CAB1356m Coupling Network for 13.56 MHz
Coupling Network for 13.56 MHz
- It matches 50 Ohm amplifier
- Use with CAB4-3910 loop antenna
- Can work with other similar antennas
- Type N f-n connectors attached directly to the loop
HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna
- The circular transmitting loop antenna
- 0.01 - 120 MHz
- diam. 100 mm
- turns 3
- BNC Connectors
FESP 5139 - DISCONTINUED replaced by HFRA 5164
- After further development of this antenna, it has been discovered a shielded antenna is needed to be useful above 5MHz
- New HFRA 5164 is 100% compliant to IEC 61000-4-39
FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop
- Magnetic, handheld coil
- 10 kHz - 3 MHz
- diam. 133 mm
- turns 9
- Immunity testing to VG 95377 Part 13
