Products
Test System for MIL-STD-641 CS114, CS115, CS116
- Automatic calibration for the whole test frequency range
- Application of all test frequencies automatically. The level can be selected or automatic.
- NO need to manually configure the measurement equipment
- NO need to manually integrate the transfer function of probes and attenuators
- Generation of test reports: NO need to record all values read from the measurement equipment
- Generation of calibration reports: NO need to record all calibration setting parameters
- Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
- Measure 4 lines of 3 phase LISN
- The picture is shown with internal LISN [EMSCOPE RX4 LZ2]
The EMC test system is designed for testing electromagnetic immunity of the electrical installation of vehicles and components against supply line transients. EMC - Test Equipment for the electrical installation of vehicles.
- Pulse #1 1-5/2000us, 600 V
- #1 1-5/1000us, 600 V
- Pulse #2a 1 / 50us, 600 V
- Pulse #3 5/100 ns, 800 V
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.
Benefits of the PG1275F Pulse Generator
- MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
- Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
- High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
- Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
- User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
Enhance your EMC testing with the 1275F Pulse Generator—precision, compliance, and versatility combined.
Highlights of the CS116 Damped Sinusoid Generator
- MIL-STD 461 CS116 Compliant: Meets stringent military testing standards.
- Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
- Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
- Efficient Operation: Single signal output reduces test time and supports automation.
- User-Friendly Control: Easily controlled via RS232 and USB interfaces.
- Versatile Configurations: Available as standalone (POG-CS116-6) or modular (M-CS116) units.
- Robust Design: Durable construction with wide power compatibility (90–264 Vac).
Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.
- The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for moderate 200 lb.
- Options
- vinyl topper with your company logo
- epoxy coating for the top (can be combined with vinyl)
The CDG 7000-E is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application.
- The compact device comprises an RF signal generator, a 3-channel RF voltmeter, and a directional coupler.
- Frequency range of the generator/power meter (4 kHz): 9 kHz – 1200 MHz
- The frequency range of the directional coupler: 10 kHz – 1000 MHz, 200 W
- Depending on ext. amplifier: IEC/EN 61000-4-6, IEC 60601-1-2 Ed. 4.1, IEC 61000-4-39, MIL 461 CS 114, ISO 11452-4, ...
