Categories

CISPR 25 (EN 55025)

OTHER PRODUCTS IN THE SAME STANDARD:
EMSCOPE, 9kHz - 110MHz, 2 channel Receiver/LISN

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
  • Measure 4 lines of 3 phase LISN
  • The picture is shown with internal LISN [EMSCOPE RX4 LZ2]

LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz

LSPM 1.0+ Triple High-Speed Power Meter, 9 kHz – 6 GHz (12GHz)

  • 4.3″ Touchscreen and Ethernet Interface
  • Three channel (Single and dual-channel versions are available as well)
  • high speed
  • high accuracy
  • high dynamic range RF Power Meter.

LSPM 2.0+, 3 Channel Power Meter, 9kHz – 26.5 (40)GHz

LSPM 2.0+ Triple High-Speed Power Meter, 9 kHz – 26.5 GHz (40GHz)

  • 4.3″ Touchscreen and Ethernet Interface
  • Three channel (Single and dual-channel versions are available as well)
  • high speed
  • high accuracy
  • high dynamic range RF Power Meter.

LSProbe 1.2 Variant E, Laser Powered Field Probe, 10 kHz to 8.2 GHz, <1 V/m … >1,000 V/m

The LSProbe 1.2 Variant E Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

  • Its standard frequency range of 10 kHz – 8.2 GHz. 1,000 V/m
  • Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 0.1 to at least 1,000 V/m.
  • A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
  • Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.

Loading...