NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
CDN ISN S8 RJ45, CDN/ISN for Shielded Telecom lines, Acc IEC 6100-4-6/CISPR 32
ISN S1, ISN for Coax Acc CISPR 32
ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32
CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32
CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
ISN 50561-1, ISN for PLC measurement, acc. EN 50561-1
NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
ISN 50561-3 - Impedance Stabilization Network
Products
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
- T-ISN 150 Ohm asymmetric
- BNC-jack 50 Ohm unsymmetric
- 2-wire
- 400 V, 3 A AC
- 9 kHz - 30 MHz
- EN55015-2002, CISPR 32, CISPR 15, CISPR 16-1-2
NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32
- Impedance Stabilisation Network (ISN)
- acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- Unshielded twisted pairs (UTP) or communication ports
- With 2, 4, 6, or 8 wires
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
The magnetic fixture „8158 Magbase“ can be used to fix a NTFM 8158, a CAT5 8158, or a CAT3 8158 to a steel wall vertically.
CDN ISN S8 RJ45, CDN/ISN for Shielded Telecom lines, Acc IEC 6100-4-6/CISPR 32
- Replaces ISN S8
- CDN for conducted common mode immunity testing according to IEC 61000-4-6.
- Impedance Stabilisation Network (ISN) acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- CISPR 22, CISPR 32 Annex G.11 and EN 55022 Annex D figure D.11
- Is capable to provide 10 GBit/s (Gigabit-Ethernet, 1000BASE-T).
ISN S1, ISN for Coax Acc CISPR 32
- ISN acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- Annex D, D9 for coaxial lines
ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32
Discontinued. See CDN ISN S8 RJ45
- Impedance Stabilisation Network (ISN)
- acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- CISPR 22, CISPR 32 Annex G.11 and EN 55022 Annex D figure D.11
- Is capable to provide 1000 MBit/s (Gigabit-Ethernet, 1000BASE-T).
CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32
- Impedance Stabilisation Network (ISN)
- acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- Unshielded twisted pairs (UTP) or communication ports
- With 2, 4, 6, or 8 wires
CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32
- Impedance Stabilisation Network (ISN)
- acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- Unshielded twisted pairs (UTP) or communication ports
- With 2, 4, 6, or 8 wires
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
- Symmetrical 100 Ω step attenuator
- Switchable between 0 dB, 10 dB, 20 dB, 30 dB, 40 dB and 50 dB
- For measurement of PLC or PLT to discover dynamic performance
- Acc. EN 50561-1:2012 chapter 9.2. Figure 4 shows the setup
ISN 50561-1, ISN for PLC measurement, acc. EN 50561-1
- Impedance stabilization network (ISN)
- For measurements of asymmetrical disturbance voltage of power line communication equipment
- Acc. standard EN 50561-1:2012, Annex B, Figure B.1.
NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
- T-ISN 150 Ohm asymmetric
- BNC-jack 50 Ohm unsymmetric
- 2-wire
- 400 V, 3 A AC
- 9 kHz - 30 MHz
- CISPR 22 D1, EN55015-2002, CISPR 32, CISPR 15
ISN 50561-3 - Impedance Stabilization Network
- Impedance stabilization network (ISN)
- For measurements of unsymmetrical disturbance voltage on equipment for power line communication (PLC)
- Acc. to EN 50561-3, Annex B.
