Products
The testing and performance evaluation of EMC test sites requires precision field-strength measurements. Seibersdorf is the European market leader in this business. We offer these measurements as an accredited laboratory. Since 1997 we are also present in the Asian market. Due to intensive investigation in this field during recent years many results have been adopted in international standards (e.g. CISPR 16 series).
STLP 9128 C stacked Logarithmic Periodic Dipole Antenna
- (150)200-1500 (4000) MHz
- Type 7/16 female, Type N female
The Conformity Assessment Business Field Sensor Probe Stand is designed for accurate placement of the field probe when carrying out testing to MIL STD 461, RTCA DO160, DEF STAN 59-411 and EN61000-4-3 (Where field monitoring is required)
- Replaces ISN S8
- CDN for conducted common mode immunity testing according to IEC 61000-4-6.
- Impedance Stabilisation Network (ISN) acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
- CISPR 22, CISPR 32 Annex G.11 and EN 55022 Annex D figure D.11
- Is capable to provide 10 GBit/s (Gigabit-Ethernet, 1000BASE-T).
FPP2.3/1.5 M Field Probe Positioner
- Single axial positioner for remote-controlled horizontal movement
- Moves 4 probes 4 times, supper fast 16 piont calibration
- Allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC61000-4-3.
- Automate uniform field calibration
- Load: 3.0 kg
- Height range 1.0 - 1.5 m
- Manual polarization change 90°
- Antenna Load: 35 kg
EMP300K-5-500 PCI 5kA Pulse Generator
- MIL-STD-188-125-1/2 Compliant – Ensures precise pulse current injection (PCI) testing for EMP protection validation.
- High-Voltage Performance – Delivers up to 350kV pulses with a peak 5kA short-circuit current.
- Fast & Repeatable Pulses – Ultra-fast and 500-550 ns pulse duration for accurate testing.
- Fully Automated & Computer-Controlled – RS232 & USB interfaces enable seamless remote operation.
- Comprehensive Accessory Support – Compatible with current probes, CDNs, fiber optic links, and automation software for a complete test setup.
IPP3K-4MS PCI Intermediate Pulse Generator
- MIL-STD-188-125-1/2 Compliant – Designed for precise EMP protection testing.
- High-Voltage Performance – 3.0 kV charging voltage with 260 A peak short-circuit current.
- Fast & Repeatable Pulses – and 3 – 5 ms pulse duration for accurate testing.
- Multi-Line Direct Coupling – 4 independent outputs for testing power, signal, and telecom lines.
- Fully Automated Control – RS232 & USB interfaces for seamless operation & remote testing.
- Complete Testing Solution – Compatible with current probes, CDNs, fiber optic links & optional automation software.
- MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
- Adjustable High-Voltage Pulses – 0.2 - 25 kV, 400A (CLP40K) for precise testing.
- Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
- Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
- Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
- Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
- Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.
- MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
- Adjustable High-Voltage Pulses – 0.05 - 5 kV, 50Amps (CLP5K) for precise testing.
- Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
- Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
- Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
- Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
- Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.
