FPP2.3/1.5 M Field Probe Positioner

Single axial positioner for remote-controlled horizontal movement
Moves 4 probes 4 times, supper fast 16 piont calibration
Allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC61000-4-3.
Automate uniform field calibration
Load: 3.0 kg

PARTNER:

MATURO GMBH

MARKETS:

TEST STANDARDS:

Data Sheet

Drawing

SPECIFICATIONS

FPP2.3/1.5 M Field Probe Positioner

The Single axial Field Probe Positioner FPP 2.3/1.5 M is designed explicitly for remote-controlled measurements at defined vertical areas. The system allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC61000-4-3.

Move 4 Field probes spaced 0.5m apart to 4 horizontal positions. Perform UFA test in 1/4 the time. This is an ideal solution to measure the UFA faster when many positions and chambers need calibration each year. The system can quickly pay for itself. Combine the use of Lumiloop fast response field probes and Power meters; measurements can be increased even further! Testing from 1 to 2 days becomes less than 1 hour!

Limit switches and the general mechanical design ensure reliable system operation. The FPP 2.3/1.5 M is fabricated from plastic (PVC and reinforced fiberglass) except for the drive unit. Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level)

The LAN (TCP/IP) - interface provides an additional control option for all functions when operated with the FCU 3.0 or NCD Controller.

Technical data:
Field probe height	Fixed 4 positions up to 2.3m
Total length	2.7m
Horizontal range automation	1.5m
Total length	2.3m
Material	Plastic and reinforced fiberglass
Position speed adjustable in combination with FCU3.0 in combination with NCD	1.0 cm/s – 35 cm/s 1.0 cm/s – 20 cm/s
Load Capacity	3 kg
Cross section	101 mm x 95 mm
Positioning accuracy	+/-0.5cm
Motor	DC stepper motor
Support Drive	1 Toothed belt
Material of toothed belts	Kevlar-reinforced (non-metallic)
Voltage	110 VAC - 230 VAC, 50 Hz / 60 Hz single phase
Current consumption	max. 16 A
Required RCD	300 mA
Control cable	Fiber optic lines
Remote control via	LAN (TCP/IP); (IEEE only with NCD)
Interference suppression	20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range	10°C – 35°C
Total weight	approx. 60 kg
Accessories	Service manual 3 m power supply cable
Controller	FCU3.0 or NCD Controller

Controller Types

LINKs=>	NCD^3.0	FCU^3.0	FCU^3.0S	FCU^3.0S-LITE
Picture
# of Devices	8	4	1	1 (one axis)
Display	5.7" touch	No	No	No
HSU^3.0	Included	Included	Included	Included
Software	mcApp	mcApp	mcApp	mcApp-Lite
Interface	IEEE 488.2, LAN, (option:USB,RS232,..)	LAN	LAN	LAN