Products
- Frequency Range:
- 50kHz - 30MHz for AC / DC LISN
- 10MHz / 100MHz - 7.5GHz for RE
- Frequency step:
- 30/500 kHz switchable for AC / DC LISN
- 10MHz / 100MHz step switchable for RE
- Includes: Generator, Charger, Storage case
- Frequency Range:
- 50kHz - 108MHz for AC / DC LISN
- 50kHz - 30MHz with Monopole Antenna (CISPR 25)
- 30MHz - 1GHz (10MHz steps)
- 1 - 6GHz (100MHz steps)
- Frequency step:
- 50/500 kHz switchable for AC / DC LISN and Monopole Antenna
- 10MHz for 30MHz - 1GHz
- 100MHz step for 1 - 6GHz
- Includes: Generator, Charger, Storage case
The Coupling- / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
The Coupling- / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
The Coupling / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
The CNA280 meets the specifications of the standard CISPR 16-1-2 A1, figure C1 (unit type A) and CISPR 16-1-3, app. B,Fig. 9. It is also required to calibrate EMI absorbing clamps like the MDS 21.
Linear polarized Logarithmic Periodic Broadband Antenna (Aluminium tubing) for Receive and Transmit Applications
Linear polarized Logarithmic Periodic Broadband Antenna combined with a 4:1 Broadband Dipole (Aluminium tubing) for Receive and Transmit Applications.
Linear polarized Logarithmic Periodic Broadband Antenna with Broadband Dipole (Aluminium tubing) for Receive and Transmit Applications.
Power frequency magnetic fields acc. to IEC 61000-4-8 Test levels continuous 3 / 10 / 30 / 100 / 300 A/m. Test level 1000 A/m short, with a special transformer. Pulsed magnetic fields acc. to IEC 61000-4-9 Test levels 100 / 300 / 1000 A/m
