Products
The Pulse Voltage Divider PVD 10-2 & PVD 10-3 have been designed to measure the pulse output of surge generators, e.g. a combination wave generators. It consists of the divider and a double-shielded coaxial cable. The measuring cable with the termination network is an essential part of the divider. The termination network can be adjusted for an oscilloscope input impedance of 1 M? // 10 - 30 pF.
The capacitive Coupling-/Decoupling Networks CDN 54200/ 74200/ 104200/ 12420 are used in combination with the Multi-CE5 / Multi-CE7 or the Surge generators PG 7-250, PG 10-504, PG 12-804 and allow superimposition of surge and burst test pulses to the 3-phase mains voltage of the device under test.
Designed for applying the impulse output voltage of the Combination Wave Generator to interconnection lines of the equipment under test, acc. to IEC 61000-4-5, Fig10.
The capacitive Coupling-/Decoupling Network CDN 5404 is used in combination with the IPG2554 and allows superimposition of damped oscillatory wave up to four I/O signal lines. For eight data lines, two devices can be used.
- Compensation Network
- For HFRA 5164
- up to 26 A/m @ 50 Watts
- 13.56 MHz
There are many options for products, adding more capability and ease of use. It is best to talk with an engineer to see how we can meet your video and audio needs.
These measuring systems are used for the optical, digital transmission of analog signals:
- 8 Channels
- With a resolution of 10 Bit
- maximal analog bandwidth of 1 MHz.
The Conformity Assessment Business Model CAB1001 Surge Inrush Compensator enables users to meet the 500A inrush requirement of EN 61000-4-11 irrespective of supply impedance.
Indexing adapter RA 9215 for fast and precise polarisation change (90° steps)
- Mast Adapter for Antennas with 22 mm tube and indexing ring.
- 3/8" and 1/4" camera threads
- Nominal frequency range: DC - 1 kHz
- Nominal measuring range: 0 - 7000 A/m
- Extended measuring range: 0 - 9000 A/m
- Nominal conversion factor: 1 (A/m)/mV
