Standards

Products

NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Unshielded twisted pairs (UTP) or communication ports 
  • With 2, 4, 6, or 8 wires

CDNE M3, 3 lines, Coupling & Decoupling Network, CISPR 15

  • for testing 3 line mains (with PE)
  • CISPR 15, EN 55015
  • 30 MHz - 300 MHz

8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall

The magnetic fixture „8158 Magbase“ can be used to fix a NTFM 8158, a CAT5 8158, or a CAT3 8158 to a steel wall vertically.

CDNE M2, 2 lines, Coupling & Decoupling Network, CISPR 15

  • for testing 2 line mains (without PE)
  • Also works as CDNE AF2
  • CISPR 15, EN 55015
  • 30 MHz - 300 MHz

SR100-6W, adaptor 150 Ohm to 50 Ohm, 100 Ohm resistor

  • Adapter for the calibration of a CDN
  • For ISN S1, ISN S8, CDN, or a CDNE
  • EN 61000-4-6, EN 55015,  CISPR 15,  CISPR 16-1-x,  CISPR 16-2-x
  • DC - 500 MHz
  • 6 W

Absolute EMC Tripod

  • Non-Metallic Design: All parts are non-metallic except the antenna connection screw, ensuring minimal interference in EMC testing.
  • 3D-Printed PLA & Hardwood Construction: Includes 1" hardwood dowels that are adjustable up to 3 feet; fiberglass dowels are also available.
  • Height Adjustability: Ranges from 37" to 68" using a 1-inch center mast.
  • Stability: Comes with leveling feet and an optional weight ballast to ensure stability.

CMAD 1614, 10 - 1000 MHz, Common Mode Absorption Device

  • Common-Mode Absorbing Clamp
  • (10) 30 - 200 (1000)MHz
  • Suppress unwanted common mode currents
  • Cable bundles maximum diameter of 26 mm
  • acc. CISPR 16-1-4

HFa-3-35-Ref, 35 Amp 3-phase Harmonics and Flicker w/Reference Impedance

  • Full compliant system meeting the requirements 
  • IEC 61000-3-2 &  IEC 61000-3-12 Harmoinc Emissions
  • IEC 61000-3-3 &  IEC 61000-3-11 Flicker Emissions
  • USB controlled, Windows 10 compatible software included
  • Singel and 3 phase 35 Amp, 120 and 230 Voltages, 50/60Hz
  • Includes Reference Impedance

SY3-EMC, 30 - 200 MHz, 2500 Watts, Tuned Yagi

The SteppIR SY3-EMC Auto-tuned Yagi system

  • 30-200MHz MIL-STD-461F/G/H and RS-103 
  • True 200 V/m @1 Meter w/ < 2500 Watts
  • Field @ the fundamental frequency
  • Harmonics filtered out
  • < 2.5:1 VSWR 
  • More Delivered Power for More Field

Absolute EMC Monopole Antenna Stand

The original ABSOLUTE EMC Monopole is specifically designed for the EMC market as a low-cost, easy-to-use solution with no metallic parts except for the antenna connection screw. It's easy to assemble and fully adjustable in height using the center mast section. Made from low permittivity materials, it's ideal for various EMC applications like holding antennas, cameras, RF field probes, and keeping cables off the floor. The monopole's compact design allows for easy maneuverability and reduces tripping hazards compared to tripods. Plus, any plastic pieces that break will be replaced free of charge for the life of the product.


Loading...