EMC EPS Bar- 1m long 5cm height, EUT/cable support

The original EMC EPS Bar is white Expanded Polystyrene can optional be painted coating to extend durability. They come in dimensional metric sizes of 100 x 8.5 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Bar is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 4 sides allows for easy positioning and test setups.

PARTNER:

ABSOLUTE EMC LLC.

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

EMC EPS Bar- EUT Support Blocks, 1-meter long, 5 cm height

The original EMC EPS Bar is white Expanded Polystyrene. They come in dimensional metric sizes of 100 x 8.5 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. Since the EMC EPS Bar is made from a denser EPS rating, it is 50% more crush resistance and is able to withstand heavy weight loads without deforming. 1cm marking on 4 sides allows for easy positioning and test setups. They are conveniently sold by the piece or in kits.

Use EMC EPS Bar for IEC, ISO, MIL-STD, and DO160 testing. It has stable dielectric properties better than wood, not retaining moisture and giving better results for testing over time. If you have requirements for a hundred lbs/kgs heavy loads, please see our line of EMC PLA Block Kits.

Specifications:

Material:	Expanded Polystyrene (EPS)	Optional Coatings:	Painted surface
Sizes Cube:	100x8.5x5cm ±2%

Permittivity:	1.02-1.04 of EPS
Minimum Density:	3.00 lb/ft³ (48 kg/m³)
Compressive Strength:	60.0 psi (414 kPa)	Other:	1cm marking 4 sides

Kits:

EMC EPS Blocks -S	10 Blocks, shipped in a cardboard box (est. 9 kg/20lb)
EMC EPS Blocks -M	20 Blocks, shipped in a cardboard box (est. 14 kg/30lb)
EMC eps Blocks -L	40 Blocks, shipped in a cardboard box (est. 18 kg/40lb)