EMC EPS Cube- 10x10x10 cm, EUT support

The original EMC EPS Cube is white Expanded Polystyrene can optional a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 10 cm which matches EUT height requirements for IEC testing above the ground plane for IEC 61000-4-5 and IEC 61000-4-6. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Cube is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on all 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.

PARTNER:

ABSOLUTE EMC LLC.

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

EMC EPS Cube- EUT Support Blocks 10cm Hight

Use EMC EPS Cube, Blocks, and Rods for IEC, ISO, CISPR, MIL-STD, and DO160 testing. It has stable dielectric properties better than wood, not retaining moisture and giving better results for testing over time. Our EPS materials are made of a heavier density than standard commercial applications (i.e. Foam sheets from a home store). This gives our products a >50% higher durability If you have requirements for a hundred lbs/kgs heavy loads, please see our line of EMC PLA Block Kits.

Specifications:

Material:	Expanded Polystyrene (EPS)	Optional Coatings:	Painted surface
Sizes Cube:	10x10x10cm ±2%

Permittivity:	1.02-1.04 of EPS
Minimum Density:	3.00 lb/ft³ (48 kg/m³)
Compressive Strength:	60.0 psi (414 kPa)	Other:	1cm marking 6 sides

Kits:

EMC EPS Cube -S	10 Blocks, Plastic Tote (5 kg/10lb)
EMC EPS Cube -M	25 Blocks Plastic Tote (7 kg/15lb)
EMC eps Cube -L	50 Blocks Plastic Tote (14kg/30lb)