Products
- Full compliant system meeting the requirements
- IEC 61000-3-2 & IEC 61000-3-12 Harmoinc Emissions
- IEC 61000-3-3 & IEC 61000-3-11 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 35 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Reference Impedance
The original ABSOLUTE EMC Monopole is specifically designed for the EMC market as a low-cost, easy-to-use solution with no metallic parts except for the antenna connection screw. It's easy to assemble and fully adjustable in height using the center mast section. Made from low permittivity materials, it's ideal for various EMC applications like holding antennas, cameras, RF field probes, and keeping cables off the floor. The monopole's compact design allows for easy maneuverability and reduces tripping hazards compared to tripods. Plus, any plastic pieces that break will be replaced free of charge for the life of the product.
The CAR coupling network 50-1 is used to couple, according to ISO 7637-4:2020, the required sinusoidal disturbances into the DUT. This transformer also facilitates d.c. isolation of the LF generator from the DUT. The transformer has a current rating of 50A (rms) for the DUT.
- Simulator for sinusoidal disturbance
- 75 Watts
- Frequency range 100kHz – 250MHz
- Overvoltage protection
- Coupling balun transformer
- 7637-4 pulse A line-to-line-coupling
- sheath current filter
- 50Ω terminated
- Low inductive, high precision lead resistors
- For power line and data line
- Software procedure for verification
- High input impedance ≥ 100 G Ohm
- Wide measurement ± 1V ~ 100 kV
- High accuracy and resolution ± 1% ± 2 counts
- Portable with large LCD/LED display 4 ½ Digit LCD
- Battery or AC supply
- Measure DC up to 100kV
The ABSOLUTE EMC Bar Clamp is specifically designed for the EMC market, providing a low-cost, easy-to-use solution with no metallic parts. It is highly adjustable, reliable, and ideal for various EMC testing applications. The EMC Bar Clamp is made from low permittivity materials, making it suitable for holding tables together or securing the DUT/EUT in position during testing.
LSFrame is LUMILOOP’s solution for straight-forward and reliable integration of one or more LUMILOOP products in a LAN-controlled, standard 19 inch form factor appliance.
LSFrame can host:
- LSProbe Laser-Powered Electric-Field Probes,
- CI 250+
- LSPM High-Speed Power Meters, and
- LSPM+ High-Speed Power Meters, and
- upcoming LUMILOOP products.
LSPM 1.0 Triple High-Speed Power Meter, 9 kHz – 6 GHz (12GHz)
- Three channel (Single and dual-channel versions are available as well)
- high speed
- high accuracy
- high dynamic range RF Power Meter.
