Standards

Products

FTC 101 B Decoupling Clamp

  • Companion to EMCL 6146
  • Usable frequency range: 10kHz - 1000MHz
  • Meets EN / IEC 61000-4-6
  • Cable bundles maximum diameter of 25 mm

FESP 5139 - DISCONTINUED replaced by HFRA 5164

  • After further development of this antenna, it has been discovered a shielded antenna is needed to be useful above 5MHz
  • New HFRA 5164 is 100% compliant to IEC 61000-4-39

FESP 5133-9 - 10 kHz - 3 MHz Radiating Loop

  • Magnetic, handheld coil
  • 10 kHz - 3 MHz
  • diam. 133 mm
  • turns 9
  • Immunity testing to VG 95377 Part 13

FESP 5132 - DC - 150 kHz Radiating Loop

  • Magnetic, handheld coil
  • DC - 150 kHz
  • diam. 120 mm
  • turns 20
  • Immunity testing to: ISO 11452-8, MIL 461E RS101, EN 55103 5.18.3.2, IEC 61000-4-39

FESP 5133 - DC - 200 kHz Radiating Loop

  • Magnetic, handheld coil
  • DC - 200 kHz
  • diam. 133 mm
  • turns 36
  • Immunity testing to MIL 461, EN 55103 - 2 A.2.1 b), EN 55103 - 2 A.4.1

FESP 5133-1330 - DC - 50 kHz Radiating Loop

  • Magnetic, handheld coil
  • DC - 50 kHz
  • diam. 126 mm
  • turns 225
  • Immunity testing to Measuring Method SF 01 G acc. to VG 95377

FESP 5135 - DC - 300 kHz Radiating Loop

  • Magnetic, handheld coil
  • DC - 300 kHz
  • diam. 500 mm
  • turns 20
  • Immunity testing to EN 55103 - 2 A.3.1

EMC PLA Block Lab kits, 10 x 10 x 5 cm

The original EMC PLA blocks are 3D printed with PLA plastic. They are extremely durable and versatile for the EMC environment. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with this lightweight and EUT support. The surface is easily wiped clean for continued years of everyday use. Ideal for use in EMC testing for EUT and cable supports. The EMC PLA Blocks are crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 6 sides and allows for stacking and locking together. They are conveniently sold in kits in tote bins for secure storage. Each block has features for looping rubber bands, zip ties, or velcro straps. these features can be used to lock blocks together or to hold EUT/DUT wiring down to the blocks. 

NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32

  • T-ISN 150 Ohm asymmetric
  • BNC-jack 50 Ohm unsymmetric
  • 2-wire
  • 400 V, 3 A AC
  • 9 kHz - 30 MHz
  • EN55015-2002, CISPR 32, CISPR 15, CISPR 16-1-2

CAR DCC Coupling Box

  • According to ISO 7637-3:2016
  • Built-in capcitor values, selectable: 0.1uF / 470pF / 470pF / 100pF / 100pF
  • Max Voltage 2000V
  • Fits to all Hilo-Test automotive CAR generators


Loading...