Standards

Products

BNB 8654 C HV Line Stabilization Network

  • Battery impedance network
  • High Voltage - 1000VDC
  • 500 Amp continuois current

LFPA 9733 C, 5 Hz - 1 MHz, Low Frequency Power Amplifier

  • Low Frequency Amplifier
  • 5 Hz - 1 MHz  
  • Typical gain: 26 dB +/- 3dB
  • AC Output Current: 28A-RMS

BNB 8656 HV Line Stabilization Network

  • Battery impedance network
  • High Voltage - 1000VDC
  • 800 Amp continuois current

ISN 303417, ISN for 150 Ohm Common Mode Measurements

  • Impedance stabilization network (ISN)
  • For the measurement of con- ducted disturbances using a current clamp on WPT (wireless power transmission) systems. 
  • Acc. standard ETSI EN 303417 chapter 6.2.4

PG1275 - MIL-STD-1275D Surge/Spike Test Generator

Benefits of the PG1275 Pulse Generator

  • MIL-STD-1275D Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
  • Spike & Surge Testing: Handles spikes up to ±500 V and surges up to 125 V.
  • High Current Capability: up to 400 A .
  • Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
  • User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.

Enhance your EMC testing with the 1275D Pulse Generator—precision, compliance, and versatility combined.

BNB 8652 B HV Line Stabilization Network

  • Battery impedance network
  • High Voltage - 1000VDC
  • 100 Amp continuois current
  • Per ISO 21498-2: 2021-03

HFRA 5149 -60 B - 0.009 - 30 MHz Transmitting Tunable loop antenna

  • The circular transmitting loop antenna
  • 9 kHz - 30 MHz
  • diam. 590 mm
  • including 50 Ohm 20 Watt termination
  • N-connectors

VBA 2700-100D-HE — 700 MHz to 2700 MHz, 100 W Dual Channel RF Power Amplifier

  • Dual-carrier / two-tone amplification for PIM excitation
  • Stable wideband RF drive into PIM fixtures, combiners, and loads
  • Lab and production PIM characterization where consistent gain and robust load handling are required
  • Dual-carrier / two-tone amplification for PIM excitation
  • Stable wideband RF drive into PIM fixtures, combiners, and loads
  • Lab and production PIM characterization where consistent gain and robust load handling are required

NNBL 8230, 9 kHz - 100 MHz, 300A, 50µH Single Path LISN

  • Measurement of interference for MIL-STD-461/462
  • 9 kHz - 100 MHz
  • 250VDC / 250VAC 50/60Hz / 140VAC 400Hz
  • Max current 300A, (500A limited time)
  • Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %

HVSE 8600, Shielded Enclosure for Automotive LISN

  • Shield Box for LISN
  • Measurements of electric- or hybrid vehicles
  • Aluminum 
  • Shielding Effectiveness: typ. > 100 dB
  • CISPR 25 Ed. 4, BMW GS 95025-1


Loading...