Products
- High Current 4 path LISN (3-Phase)
- Line Impedance Stabilisation Network
- 150 kHz to 30 MHz
- 250 VAC, 400 VDC, 200 A (option for 400VAC)
- 50 µH || 50 Ω
- CISPR 16-1-2
- High Current 2 path LISN (3-Phase)
- Line Impedance Stabilisation Network
- 9 kHz to 30 MHz
- With 250uH multilayer choke adding better decoupling 9 kHz is possible
- 750 VAC, 1000 VDC, 50 A
- (50 µH + 5 Ω) || 50 Ω
- CISPR 16-1-2
- High Current 4 path LISN (3-Phase)
- Line Impedance Stabilisation Network
- 9 kHz to 30 MHz
- 250/400 VAC, 400 VDC, 50 A (option for 400/700VAC)
- (50 µH+5 Ω) || 50 Ω
- CISPR 16-1-2
- Shield Box for 800A, LISN
- Measurements of electric- or hybrid vehicles
- Aluminum
- Shielding Effectiveness: typ. > 100 dB
- CISPR 25 Ed. 4, BMW GS 95025-1
To be compliant to the standards DEF STAN 59 and DO 160 a 10 μF capacitor like the CAP 10 has to be connected to the mains connectors of the LISN.
In order to be compliant to the standards ECE R10.06, CISPR 12 and PSA (which require a capacitance of in total 1 uF parallel to a resistance of 1 MΩ at the input side of the LISN) a 0.9 μF capacitor like the CAP 0.9-400 has to be connected to the mains terminals of the NNHV 8123-400 or NNHV 8123-800 LISN.
To be compliant to the standards DEF STAN 59 and DO 160 a 10 μF capacitor like the CAP 10 has to be connected to the mains connectors of the LISN.
- Symmetrical 100 Ω step attenuator
- Switchable between 0 dB, 10 dB, 20 dB, 30 dB, 40 dB and 50 dB
- For measurement of PLC or PLT to discover dynamic performance
- Acc. EN 50561-1:2012 chapter 9.2. Figure 4 shows the setup
- Impedance stabilization network (ISN)
- For measurements of asymmetrical disturbance voltage of power line communication equipment
- Acc. standard EN 50561-1:2012, Annex B, Figure B.1.
