HVSE 8600, Shielded Enclosure for Automotive LISN

The HVSE 8600 / HVSE 8601 Shielded Enclosure (Shielding Box) was designed to increase the shielding effectiveness of automotive LISN significantly, which is necessary for measurements of electric- or hybrid vehicles.

Material: Aluminium

Shielding Effectiveness: typ. > 100 dB

Further Information about the application of the shielded enclosure can be found in CISPR 25 Ed. 4 or e.g. in the manufacturer-specific standard BMW GS 95025-1

HVSE 8600 is suitable for the following LISN types:

NNHV 8123,
NNHV 8123-200,
NNHV 8123-400,
NNHV 8123-400R

For the NNHV 8123-800 please use HVSE 8601

HVSE 8600	Shielded Enclosure

Opt. 8600-100	Pair of flange panels with 100 A feedthrough
6-16 mm2	Cable cross-section
5-9 mm	Diameter HV-cable (measured at shield)
17 mm	Wrench size HV-cable feedthrough

Opt. 8600-200	Pair of flange panels with 200 A feedthrough
16-35 mm2	Cable cross-section
9-13 mm	Diameter HV-cable (measured at shield)
22 mm	Wrench size HV-cable feedthrough

Opt. 8600-400	Pair of flange panels with 400 A feedthrough
35-95 mm2	Cable cross-section
13-20 mm	Diameter HV-cable (measured at shield)
34 mm	Wrench size HV-cable feedthrough

Opt. 8600-blanco	Pair of blanc flange panels:
	Pair of flange plates with only 4x N-feedthroughs on the test side (2x AUX as well as RF-HV + and RF- HV-) and without any socket or feedthrough on the mains side. The bushings for HV + and HV- must be installed by the user.