Products
The ABSOLUTE EMC can design and produce Custom Antenna Adaptors. each adaptor is mad for your antennas and tripods or to be used on our Absolute EMC Tripod/monopod stands. Adaptors can be designed to rotate the antenna in the center from horizontal to vertical and position it at the center of gravity of the antenna so it sits easily on the antenna stand. Cost is set based on the size and complexity of the adaptor.
Absolute EMC with strategic partners is offing Antenna Arrays for meeting the high demanding levels required by DO-160 CAT L and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 7200 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements.
- 1-2 GHz Gain @ 1m, 22.7 - 23.5 dBi Min
- 2-4 GHz Gain @ 1m, 24 dBi
- 4-6 GHz Gain @ 1m, 26 dBi
Absolute EMC with strategic partners is offing Antenna Arrays for meeting the high demanding levels required by DO-160 CAT K and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 5000 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements.
- 400 - 1000 MHz Gain @ 1m, 11.6-15.8 dBi
- 1 - 1.6 GHz Gain @ 1m, 18.9 - 20.6 dBi
- 1.5 - 2.6 GHz Gain @ 1m, 20.3 - 22 dBi
Absolute EMC with strategic partners is offing Lens Antenna for meeting the high demanding levels required by DO-160 CAT K and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 5000 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements. Lens Antennas focus the field to reach higher levels in the near-field.
- 2 - 3.2 GHz Gain @ 1m, 20.0 - 20.9 dBi
- 2.6 - 4 GHz Gain @ 1m, 20.2 - 22.8 dBi
- 4 - 6 GHz Gain @ 1m, 21.1 - 23.6 dBi
Absolute EMC with strategic partners is offing high gain HiRF Antennas for meeting the high demanding levels required by DO-160 CAT K and MIL-STD-464. Testing for HiRF High Intens Radio Fields up to and exceeding 5000 V/m with commercially available TWT Pulsed or Solid-state amplifiers. Antennas can also be used for HERO testing of MIL-STD-464 System-level requirements.
- 6 - 8.2 GHz Gain @ 1m, 21.8 - 23.1 dBi
- 8 - 12.4 GHz Gain @ 1m, 20.7 - 23.3 dBi
- 12.4 - 18 GHz Gain @ 1m, 21.6 - 23.2 dBi
- Frequency Range:
- Conducted Emissions: 50kHz/500kHz ~ 108MHz for DC LISN
- Radiated Emissions:
- 50kHz/500kHz ~30MHz for RE with Monopole Antenna
- 10MHz/100MHz ~1G for RE
- 100MHz ~6G for RE
- Frequency steps:
- 50kHz/500kHz step switchable for CE & RE with Monopole Antenna
- 10MHz/100MHz step switchable for RE
- Includes: Generator, antenna, charger, USB cable, wooden storage box
- 1-18GHz Frequency Range
- Compensation long cable loss for EMI Measurement
- Improve system noise floor flatness
- High EMI performance
- High linearity LNA for EMI measurement
- High dynamic range
- Unconditionally Stable
- State-of-the-Art Technology
ECAT Lightning Test System (L TS) I s a modular test platform which tests the lightning simulator requirements of RTCA DO-160. Sections 22, and 17 The system is expandable to meet MILSTD-461G-CS117, Boeing. Airbus, EUROCAE and other avionic standards.
- Safe / Quick Test Set-up
- Simple user interface
- Waveforms. 1, 2, 3, 4, 5A, 5B, 6, & voltage spikes
- Levels 1, 2, 3, 4, and 5+
- Single Stroke, Multiple Stroke, Multiple Burst and Pin Injections from the same front panel
- Modular architecture
- Voltage spikes
FPP2.3 Manual Field Probe Positioner
- Allows for field probe placement according to EN61000-4-3 and IEC61000-4-3.
- Used for uniform field calibration
- Load: 3.0 kg
DYN 8WD I-30t Dynamometer - Integrated into TT 16.0-30t-DYN Turntable
- 30,000kg capacity
- Adjustable axle length and width
- 120k/hr max speed dynamometer
- Turntable rotational speed: 0.1 rpm – 0.5 rpm
