Standards

The Schwazbeck Biconical elements come in many sizes and offer different performances depending on what your needs are. For best low-frequency performance (good gain, low antenna factor), larger elements work better. The downfall of larger elements is handling or fitting in the test space. Many situations may not need outstanding performance with larger elements. The benefits of these elements and antenna baluns are that they all use the same connections (10mm), allowing for versatile sharing/switching of elements. No need to purchase a new antenna; get new elements.

Audio Transformer 200W, 50A

• 160x155x200mm
• 2:1 ratio 
• 200 W Maximum30Hz - 250 kHz
• 100 W Maximum at15 Hz - 30 Hz
• Insulation Resistance Test - 2kV

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.

PSURGE 30.2 

• Surge System
• Up to 30 kV impulse voltage
• Up to 30 kA impulse current

• The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
• High strength EPS 3lb per ft3
• Low Permittivity >1.04
• Made for moderate 200 lb.
• Options
• vinyl topper with your company logo 
• epoxy coating for the top (can be combined with vinyl)

PEFT 8010 

• EFT/Burst
• Up to 7.3kV (6.6kV at CDN)
• CDN: 264V-AC 16-440Hz, 125V-DC
• CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC

• Capability:
• • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
• Spatial scan time:
• • Continuous real-time for the entire scan area (1,218 probes activated) when Level 1 is selected:  5 sec.
  • Selected area 2.25 cm x 2.25 cm, 9 probes activated.
  • Level 1: 
• Spectral scan time:
• • 11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
• Supported operating systems: Windows 10®
• Supported overlays: Picture in JPEG format 
• Standard Gerber© RS274x format and HPGL form

• Capability:
• Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
• Customization of the robot arm size, any size, is possible. 
• Spatial scan time:
• • The scan time depends on size and area
• Ideal for large component boards
• The robotic arm allows for advanced scans on complex items
• Supported operating systems: Windows 10®
• Supported overlays: Picture in JPEG format 
• Standard Gerber© RS274x format and HPGL form

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit. 

Axos 5 - Compact

• Multi Tester with 16AMP CDN
• EFT/Burst 5kV IEC 61000-4-4
• Surge, Combination Wave 5kV IEC 61000-4-5
• Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
• AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
• DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)