Standards

Products

Log Periodic Antenna Overview

By Frequency Range

ONYX 16, 16kV ESD Simulator

Onyx 16

  • +/- 16kV air and Contact Discharge
  • 150pF/330Ohm Standard, Other networks available
  • >16 hour Battery life, AC mains option
  • Optional Software

EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner

  • Capability:
    • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
    • Customization of the robot arm size, any size, is possible. 
  • Spatial scan time:
    • The scan time depends on size and area
  • Ideal for large component boards
    • The robotic arm allows for advanced scans on complex items
  • Supported operating systems: Windows 10®
  • Supported overlays: Picture in JPEG format 
  • Standard Gerber© RS274x format and HPGL form

RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz

  • Frequency Range of 300 MHz to 6.0 GHz
  • Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns
  • Near-field insights such as Amplitude and Phase distribution are available in  seconds
  • Gain, Efficiency, and S11 chart with Supported VNAs
  • “Real-time” real-fast
  • Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas). 
  • Simple set up and Easy to use

400 - 6112, 2-Ch, 250kS/s, AnyWave Control Unit

WaveMaster + AnyWave

BOLAB WaveMaster software and the BOLAB AnyWave control unit allow the control of power supplies as well as 4 quadrant amplifiers via the analog interfaces.

The powerful and easy-to-use BOLAB WaveMaster software is unique in the world. Without any knowledge in software development, designing ordinary and complex waveforms is very easy. A graphic waveform editor allows the generation

of individual curves in no time. Also, with tabular input, all types of waveforms can be produced instantly.

Dips-Interrupts-Variations Test System 30kVA (43A) & 50kVA (75A) + 1 & 3-Phase

  • Turnkey EMC test solution — ready to use with full hardware and software integration
  • Fast voltage transitions (<5 µs) for full compliance with critical standards
  • Covers all major IEC/EN 61000-4-X tests including -11, -13, -14, -27, -28, -34
  • User-friendly ACSControl software with built-in test libraries and reporting
  • Modular, scalable power platform from 30 kVA up to 2000+ kVA
  • Versatile use beyond EMC: ideal for grid simulation, anti-islanding, and inverter testing
  • Compact 19" rack-mounted units — easy system integration and footprint optimization
  • Certified for global compliance (CE, UKCA, RoHS, EN/IEC EMC and safety standards)

NFPKIT, EM Near Field Probe Kit w/Camera & Software

" A Probe Kit on Steroids"

  • Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
  • Normalization and correction when using the EMViewer software
  • Flat response within the range of operation
  • Slim Design and Protective Coating
  • 18GHz Measured Cable included

PGESD 300K DP - Helicopter 300kV ESD Test System

PGESD 300K DP - Helicopter 300kV ESD Test System

  • High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
  • Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
  • Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
  • Automated Operation: PC-based software for remote control, calibration, and test reporting.
  • Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
  • Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
  • Durable Design: Built for demanding military and industrial testing environments.

CDG 7000-E Conducted Immunity Generator, (4)9 kHz - 1 GHz , No internal Amplifier

The CDG 7000-E is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application. 

  • The compact device comprises an RF signal generator, a 3-channel RF voltmeter, and a directional coupler.
  • Frequency range of the generator/power meter (4 kHz): 9 kHz – 1200 MHz
  • The frequency range of the directional coupler: 10 kHz – 1000 MHz, 200 W 
  • Depending on ext. amplifier:  IEC/EN 61000-4-6, IEC 60601-1-2 Ed. 4.1,  IEC 61000-4-39, MIL 461 CS 114, ISO 11452-4, ...

POG-CS116-CS115 Test Generator, Dampened Wave and Switch Transients

Highlights of the CS116 Damped Sinusoid Generator

  • MIL-STD 461 CS115+CS116 Compliant: Meets stringent military testing standards.
  • Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
  • Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
  • Efficient Operation: Single signal output reduces test time and supports automation.
  • User-Friendly Control: Easily controlled via RS232 and USB interfaces.
  • Robust Design: Durable construction with wide power compatibility (90–264 Vac).

Optimize your naval and industrial testing with the CS116 & CS115 Damped Sinusoid & Switch Transient Generator—precision and efficiency combined.


Loading...