Standards

Products

STLP 9128 C - 200-1500 MHz Stacked Log Periodic Antenna

STLP 9128 C stacked Logarithmic Periodic Dipole Antenna

  • (150)200-1500 (4000) MHz
  • Type 7/16 female, Type N female

CABFPS, Field Sensor Probe Stand

The Conformity Assessment Business Field Sensor Probe Stand is designed for accurate placement of the field probe when carrying out testing to MIL STD 461, RTCA DO160, DEF STAN 59-411 and EN61000-4-3 (Where field monitoring is required)

CDN ISN S8 RJ45, CDN/ISN for Shielded Telecom lines, Acc IEC 6100-4-6/CISPR 32

  • Replaces ISN S8
  • CDN for conducted common mode immunity testing according to IEC 61000-4-6.
  • Impedance Stabilisation Network (ISN) acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • CISPR 22, CISPR 32 Annex G.11 and EN 55022 Annex D figure D.11
  • Is capable to provide 10 GBit/s (Gigabit-Ethernet, 1000BASE-T).

FPP2.3/1.5 M Field Probe Positioner

FPP2.3/1.5 M Field Probe Positioner

  • Single axial positioner for remote-controlled horizontal movement
  • Moves 4 probes 4 times, supper fast 16 piont calibration
  • Allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC61000-4-3.
  • Automate uniform field calibration
  • Load: 3.0 kg

MAS 1.0/1.5 - 35kg Manual Antenna Stand

  • Height range 1.0 - 1.5 m 
  • Manual polarization change 90°
  • Antenna Load: 35 kg

EMP300K-5-500, PCI Short pulse (E1) generator, 5kA

EMP300K-5-500 PCI 5kA Pulse Generator 

  • MIL-STD-188-125-1/2 Compliant – Ensures precise pulse current injection (PCI) testing for EMP protection validation.
  • High-Voltage Performance – Delivers up to 350kV pulses with a peak 5kA short-circuit current.
  • Fast & Repeatable Pulses – Ultra-fast and 500-550 ns pulse duration for accurate testing.
  • Fully Automated & Computer-Controlled – RS232 & USB interfaces enable seamless remote operation.
  • Comprehensive Accessory Support – Compatible with current probes, CDNs, fiber optic links, and automation software for a complete test setup.

IPP3K-4MS, 260A, Intermediate Pulse (E2) Generator

 IPP3K-4MS PCI Intermediate Pulse Generator 

  • MIL-STD-188-125-1/2 Compliant – Designed for precise EMP protection testing.
  • High-Voltage Performance – 3.0 kV charging voltage with 260 A peak short-circuit current.
  • Fast & Repeatable Pulses – and 3 – 5 ms pulse duration for accurate testing.
  • Multi-Line Direct Coupling – 4 independent outputs for testing power, signal, and telecom lines.
  • Fully Automated Control – RS232 & USB interfaces for seamless operation & remote testing.
  • Complete Testing Solution – Compatible with current probes, CDNs, fiber optic links & optional automation software.

CLP40K, 400 A, Charge line generator, POE

  • MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
  • Adjustable High-Voltage Pulses – 0.2 - 25 kV, 400A (CLP40K) for precise testing.
  • Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
  • Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
  • Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
  • Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
  • Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.

CLP5K, 50A, Charge line generator, POE

  • MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
  • Adjustable High-Voltage Pulses –  0.05 - 5 kV, 50Amps (CLP5K) for precise testing.
  • Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
  • Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
  • Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
  • Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
  • Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.

TPD50-100-2 & TPD50-100-4, 2 & 4 Line, 100 A, LISN with TPD

  • MIL-STD-461 / RS105 Compliant – Ensures NEMP protection and conducted disturbance testing compliance.
  • High Current Capacity – Supports up to 100A continuous operation for demanding test environments.
  • Single-Phase & Three-Phase Options – Available in 2-phase (TPD50-100-2) and 4-phase (TPD50-100-4) versions.
  • Built-In LISN Channels – Provides accurate measurement of conducted disturbances on connected phases.
  • Superior Shielding & Filtering – Feedthrough capacitor filtering minimizes unwanted electromagnetic noise.
  • Easy Installation & Mobility – Simple connection setup, compact design, and secure grounding options.


Loading...