The capacitive Coupling-/Decoupling Network CDN 2802 is used in combination with the Multi-CE5 & Multi-CE7 and allows superimposition of surge and burst test pulses to up to eight I/O signal lines.

These measuring systems are used for the optical, digital transmission of analog signals:

• 1-16 Channels
• With a resolution of 10 Bit
• maximal analog bandwidth of 100 kHz.

The Surge Sense has been developed with EMC test laboratories in mind to enable a “go / no-go” verification of the surge generator output prior to test.

The Trans Sense has been developed with EMC test laboratories in mind to enable a “go/no-go” verification of the transient generator output prior to the test.

The VDips-Sense has been developed with EMC test laboratories in mind to enable a “go / no-go” verification of the Voltage Dip generator output prior to test.

CISPR 32 Annex C section C.2.2.1 contains a requirement to identify emissions that are intermittent in nature and apply timing criteria to determine if the emission complies with the standard, irrespective of level.

Support arm with balancer for ESD test station

• Support arm with the carriage
• 360 degrees pivotable

Mast Adapter for AM 9144 with 22 mm hole for most Antenna models

• 3/8" and 1/4" camera threads polarisation and
• elevation continuously adjustable

The USLP 9143 is a log-periodic antenna 

• 0.25 - 8 GHz
• 50 W
• Type N (female) 

AA 9205 Mast Adapter for Antenna Mast System AM 9144