IPP3K-4MS PCI Intermediate Pulse Generator 

• MIL-STD-188-125-1/2 Compliant – Designed for precise EMP protection testing.
• High-Voltage Performance – 3.0 kV charging voltage with 260 A peak short-circuit current.
• Fast & Repeatable Pulses – and 3 – 5 ms pulse duration for accurate testing.
• Multi-Line Direct Coupling – 4 independent outputs for testing power, signal, and telecom lines.
• Fully Automated Control – RS232 & USB interfaces for seamless operation & remote testing.
• Complete Testing Solution – Compatible with current probes, CDNs, fiber optic links & optional automation software.

• MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
• Adjustable High-Voltage Pulses – 0.2 - 25 kV, 400A (CLP40K) for precise testing.
• Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
• Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
• Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
• Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
• Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.

• MIL-STD-188-125-2 Compliant – Designed for pulse current injection (PCI) testing of antenna POE protective devices.
• Adjustable High-Voltage Pulses –  0.05 - 5 kV, 50Amps (CLP5K) for precise testing.
• Broad Frequency Coverage – Supports testing from 30 MHz up to 477.5 MHz with variable charge line plugs.
• Ultra-Fast Pulse Rise Time – and for high-speed transient testing.
• Direct Coaxial Coupling – No external coupling device required for efficient pulse injection.
• Automated Operation & Remote Control – RS232 & USB interfaces for seamless integration and monitoring.
• Complete Test Solution – Includes charge line plugs, current probes, fiber optic links, and optional Montena PULSELab software.

• MIL-STD-461 / RS105 Compliant – Ensures NEMP protection and conducted disturbance testing compliance.
• High Current Capacity – Supports up to 100A continuous operation for demanding test environments.
• Single-Phase & Three-Phase Options – Available in 2-phase (TPD50-100-2) and 4-phase (TPD50-100-4) versions.
• Built-In LISN Channels – Provides accurate measurement of conducted disturbances on connected phases.
• Superior Shielding & Filtering – Feedthrough capacitor filtering minimizes unwanted electromagnetic noise.
• Easy Installation & Mobility – Simple connection setup, compact design, and secure grounding options.

ESD Pulse Generator 10 kV – PESD-ECSS-12K

• High-Voltage Range: 20 V to 10 kV, positive polarity only.
• ECSS Compliant: Meets ECSS-E-ST-20-07C Rev.2 for space-grade ESD tests.
• Damped Oscillatory Waveform: Ensures accurate wire-coupled discharge simulations.
• Remote Control & Monitoring: Offers single shot, repetitive, or remote triggering with RS-232/USB.
• Safety & Reliability: Conforms to EN61010-1 and integrates a 24 Vdc safety loop

ESD Pulse Generator 10 kV – PESD-ECSS-12K

• High-Voltage Range: 20 V to 10 kV, positive polarity only.
• ECSS Compliant: Meets ECSS-E-ST-20-07C Rev.2 for space-grade ESD tests.
• Damped Oscillatory Waveform: Ensures accurate wire-coupled discharge simulations.
• Remote Control & Monitoring: Offers single shot, repetitive, or remote triggering with RS-232/USB.
• Safety & Reliability: Conforms to EN61010-1 and integrates a 24 Vdc safety loop

ESD Simulator Stand

• Easily and safely put the ONYX 16 or 30 ESD simulator in an upright position
• 2 holders for Air Discharge & Contact Discharge Tips when not in use
• Firmly holds the base and will not allow the simulator to tip. 
• Easy grab-and-go

PPG-E1-1200 Portable Pulse Generator – Key Highlights

• MIL-STD-188-125 Compliant – Designed for HEMP Pulse Current Injection (PCI) testing.
• High-Current Pulse Generation – Delivers 50 A to 1.2 kA short-circuit current.
• Battery-Powered for Field Testing – Operates >24 hours without external power.
• Fast & Efficient Testing – Pulse rise time ≤ 20 ns, pulse duration 500-550 ns.
• USB Fiber Optic Control – Remote operation with full galvanic isolation for safety.
• Complete Test System Available – Includes couplers, current probes, decoupling networks.
• Rugged Transport Case – Portable & easy to deploy for on-site testing.
• Industry-Leading Accuracy – Precise data acquisition & error-free pulse measurement.

• Load Capacity 20kg (when balanced)
• Height range 1.0 - 6.0m 
• Pneumatic polarization change 90°
• Electric stepper motor height

The polarisation swivel fixture PDG 9211 allows changing the polarisation of larger horn antennas by a single person easily. With the four locking points, the antenna can snap in increments of 90° angles to horizontal or vertical polarisation.