Products
The high-voltage pulse generator PG 5-200/ 10-1000 creates standard impulse voltages with waveforms 1.2/50 µs and 10/700 µs. It is designed for dielectric testing of components and systems as well as testing of the electromagnetic compatibility of electronic systems and devices acc. to CCITT-K17/K20/K22, ITU-T/K44, IEC 61000-4-5 etc. They are designed for testing of impulse dielectric strength of components, insulation, air-and surface flash-over gaps as well as for testing surge immunity of devices and systems acc. to CCITT - K22, ITU-T-K44. Picture: incl. option PA503
The high-voltage impulse generator PG 12-1440 standard impulse voltages with waveforms 1.2/50 µs or 10/700 µs. The output voltage is adjustable between 0.5 kV and 12 kV. The polarity of the output voltage is selectable. Positive, negative or alternating polarity of the output voltage can be preselected.
The high-voltage impulse generator PG 14-1960 generates standard impulse voltages with waveforms 10/700 µs. The output waveform can be switched to 0.5/700µs wave. Output voltage is adjustable between 0.2 kV and 14 kV. The polarity of the output voltage is selectable. Positive, negative or alternating polarity of the output voltage can be preselected.
The high-voltage impulse generator PG 20-4000 generates standard impulse voltages with waveform 10/700 µs. The output voltage is adjustable between 1 kV and 20 kV. The polarity of the output voltage is selectable, positive or negative.
The original EMC EPS Block is white Expanded Polystyrene can optional be covered in a vinyl covering on top and sides or with a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Block is crush resistance able to withstand heavy weight loads without deforming. 1cm marking on 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.
TEM-6000 STRIPLINE Mod.2020 is a 6 GHz IC Stripline TEM Cell to generate EM fields for testing sample IC devices. It meets the requirements of IEC 61967-2/8, IEC 62132-8 and SAE 1752-3
Mini EMI Camera for Low Emission / High Field Use
- 10x Optical Zoom
- For use in smaller spaces
- Integrated microphone
- Battery or wall-powered
- Single Fiber operation (duel direction)
- Options for Pan/Tilt, Joystick, HIRF, recording, motion triggering, OCR, ...
Mini EMI Camera for Low Emission / High Field Use
- For use in very small spaces
- Integrated microphone
- Battery or wall-powered
- Single Fiber operation (duel direction)
- Options for HIRF, recording, motion triggering, OCR, ...
The infrared camera opto-LWIR was developed specifically for EMC tests. In high field strengths with directional antennas (fire protection!), an overload of the DUT or the absorbers can be detected early.
The dAV receivers have an integrated loudspeaker with adjustable volume, an output for stereo transmission, and HDMI and BNC connectors for Video OUT. The receiver can be ordered in tabletop housing or for 19" rack mounting. An optional SDI output and an ethernet connector are available. Offering a few different configurations depending on the chamber and system size.
