• LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz
  • LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz
  • LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz
  • LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz
  • LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz
  • LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz

LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz

LSPM 1.0+ Triple High-Speed Power Meter, 9 kHz – 6 GHz (12GHz)

  • 4.3″ Touchscreen and Ethernet Interface
  • Three channel (Single and dual-channel versions are available as well)
  • high speed
  • high accuracy
  • high dynamic range RF Power Meter.

PARTNER:

MARKETS:

TEST STANDARDS:

LSPM 1.0 Data Sheet

LSPM 1.0 Manual

SPECIFICATIONS

LSPM 1.0+, 3 Channel Power Meter, 9kHz – 6 (12)GHz 

The LSPM 1.0+ Triple High-Speed Power Meter is a three-channel, high-speed, high accuracy, and high dynamic range RF Power Meter. Single and dual-channel versions are available as well. Its frequency range is 9 kHz – 6 GHz. Operation up to 12 GHz is supported with reduced performance.

Compensation of linearity, frequency, and an actively controlled power sensor temperature guarantee accurate measurements from less than -50dBm to at least 20dBm. A dynamic range of 90dB is achieved for many frequencies.

The LSPM 1.0+ High-Speed Power Meter’s high sampling rate allows for high-resolution time-domain signal analysis. The Power Meter can be synchronized with signal generators in order to realize high-resolution pulse analysis.

LSPM 1.0+ High-Speed Power Meters can be combined seamlessly with LUMILOOP’s LSProbe E-Field Probes to accelerate standard EMC measurements such as IEC 61000-4–3 and 61000–4-21 by a factor of more than 100 over traditional setups.

Rearward connectors are available upon request.

 

Test Automation Integration

  • Rohde & Schwarz – ELEKTRA
  • Rohde & Schwarz – EMC32 – Version 10.0
  • Nexio – BAT-EMC
  • Ametek – Compliance 5
  • Ametek – Compliance and Immunity 6 (CIS 6)
  • ETS-Lindgren – TILE!
  • Raditeq – RadiMation
  • Teseq – WIN 6000
  • Techno Science Japan – TEPTO
  • AR – Emcware
  • Frankonia – ProveEMC

 

LSPM 1.0+ System

The LUMILOOP LSPM 1.0+ System consists of a LSPM 1.0+ high-speed power meter. The LSPM is available with 1, 2. or 3 channels. The system carrying case includes LSPM software package and a power supply.

 

 LSPM 1.0+ System Scope of Delivery

LSPM 1.0+ Power Meter (9 kHz - 6 GHz), Single, Double, or Triple-Channel

-          1, 2, or 3-channel high-speed RF power meter

-          LSPM with 4.3" touchscreen and Ethernet interface

-          internal power supply, IEC 60320 C14 connector, power cord

-          sampling rate: 2 MSamples/s

-          frequency range & in-house calibration: 9 kHz - 6 GHz

-          damage level >30 dBm

-          RF input: 50 Ohm, type N

-          dimensions (WxDxH): 260 x 150 x 88 mm

-          measurement range:

o   Low Band: 9 kHz - 400 MHz: +20 dBm

o   High Band 0.4 ... 4 GHz: +20 dBm

o   High Band 4 ... 6 GHz: +20 dBm

-          Lumiloop Software Package on USB flash drive

o   incl. calibration data

-          LSPM Carrying Case

 

LLSPM 1.0+ Specifications

For detailed technical specifications, please take a look at the LSPM 1.0+ datasheet.

 

Frequency Range 9 kHz – 6 (12) GHz 
Amplitude Accuracy±0.1 dB
Linearity Error±0.15 dB
Temperature Stability±0.1 dB

 

LSPM 1.0 Power Resolution

 

Accessories/Options

LSPM 1.0+ Power Meter (9 kHz - 6 GHz), Single-Channel

 Part. No. 2104
LSPM 1.0+ Power Meter (9 kHz - 6 GHz), Duel-Channel Part. No. 2105
LSPM 1.0+ Power Meter (9 kHz - 6 GHz), Triple-Channel Part. No. 2103
LSPM+ UPGRADE - LSPM with 4.3" Touchscreen and Ethernet interface
- runs LSProbe TCP Server and a simplified GUI
- internal power supply, IEC 60320 C14 connector
- dimensions: width x height x depth = 260 x 88 x 150 mm
- UPGRADE for LSPM, can only be ordered combined with one of the following part no.:
2101, 2102, 2103 (LSPM 1.0); 2111, 2112, 2113 (LSPM 2.0)
- can be combined with part no. 2231 (connectors at rear panel)		 Part. No. 2002
  LSPM Conversion for Connectors at Rear Panel
- conversion of LSPM Power Meter for connectors at rear panel		 Part. No. 2231
LSPM 1.0 ISO 17025 Accredited Calibration (9 kHz - 6 GHz),
- external certified body calibration according to IEC/ISO 17025
- for DAkkS certificate, please add part no. 2204.
- frequency range 9 kHz to 6 GHz
- calibration power level 0 dBm		 Part. No.  2201(single), 2202(Duel), 2203(Triple)
LSPM Accredited Calibration, Additional DaKKs Certificate
- additional DaKKs Certificate for ISO17025 accredited calibration
- can only be ordered combined with one of the following Service Part No.: 2201, 2202,
2203, 2211, 2212, 2213		 Part. No. 2204
19″ Rack Mount Kit, 1x LSPM+ Power Meter and blind panel
- front panel for 19 inch rack mounts, 2 rack unit (2U)
- holds up to 1 LSPM+ Power Meters
- unused position covered by blind panel (on request)		 Part. No. 3029

 

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...